ABB PNI800 PN800 Plant Network Interface Module

ABB PNI800 PN800 Plant Network Interface Module

Basic Information

Product Code：PNI800.

Product Name: PN800 Factory Network Interface Module.

Place of Origin: Generally Switzerland, some labelled as India.

Manufacturer: ABB.

Product Features

Communication support: Support Profibus DP bus standard, communication rate 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, 93.75k kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s, and 12MBit/s, etc., with 9-pin Sub_D jack connector. The pin definition of the 9-pin Sub_D jack connector complies with the Profibus DP protocol specification.

Powerful protection: 4000V lightning protection, 1.5A overcurrent protection, and 600W surge protection, industrial-grade design, and EMC testing and certification to adapt to the harsher industrial environment.

Reasonable power supply design: DC9-36V wide redundant dual power supply, with DC1500V power isolation and reverse connection protection, typical working voltage of DC24V, power consumption less than 4W.

Alarm Output: Equipped with link failure and power failure alarm outputs, relay contact capacity is DC48V/1A.

Easy to install: IP30 protection, wavy aluminium reinforced housing, standard industrial 35mm rail mounting.

Clear Status Indication: Equipped with 6 dual-colour LED status indicators, it is convenient for users to know the operating status of the equipment in real time.

Areas of application

The module is mainly used in ABB's Symphony Plus control system as a bridge between the control system and various field devices and networks to achieve communication and data exchange in industrial automation environments, such as connecting sensors, actuators, and other controllers to the control system to achieve the monitoring and control of industrial production processes.

FEATURES

• Process Station with integrated fieldbus  capability  

• 4 high-speed fieldbus lines  

• Supports different fieldbus types, even  simultaneously:  PROFIBUS-DP, up to 12 MBd  Modbus  CAN  Foundation Fieldbus H1 (with LD800  HSE)  

• Easy engineering:  fully integrated in Control Builder F  

• One unified database for field devices  shared by the control level and the Human  System Interface (HSI)  

• Module recognition with factory and operational parameters  

• Comprehensive diagnostics for proactive  maintenance  

• Compact, rugged design  

• Front panel connectors  

• DIN Rail (C-rail) or wall mounting for easy  installation  

• Ambient temperature 0-60 °C (32-140 °F)  with temperature monitoring  

• EMC certification according to EN50082  

• Certification:  CE, NAMUR, CSA, UL, EN61000-6-2.

The AC 800F is available in two versions:  

• 4 MB static RAM, 4 MB EPROM  

• 16 MB synchronous dynamic RAM,   8 MB EPROM

The AC 800F optionally provides several levels  of redundancy: 

• device redundancy with 2 AC 800F  

• power supply redundancy (24 V DC)  

• Ethernet communication redundancy   (standard)  

• Cable redundancy for Profibus DP,   requires external equipment (RLM01)

AC 800F Controller Redundancy

Controller redundancy can be achieved by installing two  AC 800F. To ensure quick and smooth takeover by the secondary AC 800F in case the primary AC 800F fails, a dedicated  redundancy communications link through the second Ethernet  module makes sure that both AC 800F are always synchronized. All inputs and outputs are designed to support redundant  operation.