K-WANG

+086-15305925923
Service expert in industrial control field!
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence 
Ship control system
Equipment control system
Power monitoring system
Current position:
   
Brand
Bently 3500 92 Communication Gateway Datasheet
❤ Add to collection

Bently 3500 92 Communication Gateway Datasheet

+86-15305925923
Mr.Wang
wang@kongjiangauto.com

The 3500/92 Communication Gateway module provides extensive communication capabilities of all rack monitored values and statuses for integration with process control and other automation systems using both Ethernet TCP/IP and serial (RS232/RS422/RS485) communications capabilities.  It also permits Ethernet communications with 3500 Rack Configuration Software and Data Acquisition Software.

12311.00
¥10909.00
Weight:3.200KG
Quantity:
(Inventory: 20)
Consultation
Product parameters
  • Telephone:+86-15305925923
  • contacts:Mr.Wang
  • Email:wang@kongjiangauto.com
Description

The 3500/92 Communication Gateway module provides extensive communication capabilities of all rack monitored values and statuses for integration with process control and other automation systems using both Ethernet TCP/IP and serial (RS232/RS422/RS485) communications capabilities.  It also permits Ethernet communications with 3500 Rack Configuration Software and Data Acquisition Software.


Bently 3500 92 Communication Gateway Datasheet

Specifications

Inputs

Power Consumption 5.0 watts typical with

ModbusRS232/ RS422 I/O

Module

5.6 watts typical with

Modbus RS485 I/O Module

Data Types Collects data from other

modules in the rack, such

as current measured

values with time stamp,

module statuses, and

current alarm statuses, via

a high speed internal

network.

Exact data types returned

depend on module type

and channel

configuration.

Update Time: The data

collection rate depends on

rack configuration but will

not exceed 1 second for all

modules in the 3500 rack.

Outputs

OK LED Indicates when the

3500/92 is operating

properly.

TX/RX LED Indicates when the

3500/92 is

communicating with other

modules in the 3500 rack.

Protocols

BNC Host Protocol Communication with 3500

Configuration Software

and 3500 Data Acquisition

and Display Software over

Ethernet TCP/IP.

Modbus Based on AEG Modicon PIMBUS-300 Reference

Manual. Uses Remote

Terminal Unit (RTU)

transmission mode.

Ethernet

Communication Link Ethernet, 10Mbps, and

conforms to IEEE802.3

Protocol Ethernet TCP/IP frame and

Modbus/TCP

Connection RJ-45 (telephone jack

style) for 10BASE-T Ethernet

cabling

Environmental Limits

Main and I/O Module

Operating Temperature

-30 °C to +65 °C

(-22 °F to +149 °F)

Storage Temperature

-40 °C to +85 °C

(-40 °F to +185 °F)

Humidity 95%, non-condensing

Physical

Main Board

Dimensions

(Height x Width x Depth)

241 mm x 24.4 mm x 242

mm

(9.50 in x 0.96 in x 9.52 in)

Weight 0.82 kg (1.8 lb.)

I/O Modules

Dimensions

(Height x Width x Depth)

241 mm x 24.4 mm x 99.1

mm

(9.50 in x 0.96 in x 3.90 in)

Weight 0.44 kg (0.96 lb.)

Rack Space Requirements

Monitor Module 1 full-height front slot

I/O Modules 1 full-height rear slot

Ordering Information

For the detailed listing of country and product

specific approvals, refer to the Approvals Quick

Reference Guide (108M1756) available from

Bently.com.

3500/92 Communication Gateway

3500/92-AA-BB-CC

A: I/O Module Type

01 ModbusRS232/RS422 I/O Module

02 ModbusRS485 I/O Module

03 Ethernet/RS232 Modbus I/O Module

04 Ethernet/RS485 Modbus I/O Module

B: Memory Type

01 Low Memory

C: Agency Approval Option

00 None

01 CSA/NRTL/C

02 CSA/ATEX/IECEx

Additional Options

Firmware

126M4118-01 Firmware Upgrade Kit

Older Communication

Gateway modules will

require a Firmware Upgrade

to communication with a

new I/O Module. See

3500/92 manual for detailed

information.

Cables

Standard 10BASE-T Shielded

Category 5 Cable with RJ-45

connectors

138131-AAA

A: Length (in ft.) up to 320 ft in length.

0 0 6 6 feet (1.8 meters)

0 1 0  10 feet (3 meters)

0 2 5  25 feet (7.3 meters)

0 4 0 40 feet (12 meters)

0 5 0 50 feet (15 meters)

0 7 5 75 feet (22.5 meters)

0 8 5 85 feet (25.5 meters)

1 0 0    100 feet (30.5 meters)

1 2 0  120 feet (36.6 meters)

1 5 0    150 feet (44.8 meters)

2 0 0  200 feet (61 meters)

2 5 0 250 feet (75 meters)

3 2 0  320 feet (98 meters)

For specific cable lengths, please order

through Bently Nevada Custom Products.

30 ft. - 100 ft. is ordered in 5ft. increments

only. 100 ft. - 320 ft. is ordered in 10ft.

increments only

Serial Cabling (RS232): RS232

Cable, Host to 3500/92

130419-AAAA-BB

A: Cable Length

0 0 1 0 10 feet (3 meters)

0 0 2 5 25 feet (7.5 meters)

0 0 5 0  50 feet (15 meters)

0 1 0 0 100 feet (30.5 meters)

B: Assembly Instructions

0 1      Not Assembled

0 2      Assembled

RS232 Cable, Honeywell PLCG to

3500/92

130420 - AAAA-BB

A: Cable Length

0 0 1 0      10 feet (3 meters)

0 0 2 5      25 feet (7.5 meters)

0 0 5 0      50 feet (15 meters)

0 1 0 0      100 feet (30.5 meters)

B: Assembly Instructions

0 1 Not Assembled

  • Reliance Electric Engineering Drive System and DBU Dynamic Braking Unit
  • RELIANCE ELECTRIC INVERTRON DBU Dynamic Braking Unit
  • Reliance 57C413B/57C423 common memory module
  • Rockwell Automation AutoMax™ Distributed Power System
  • Reliance Electric AutoMax Programming Executive V3.5
  • Reliance Electric DCS 5000 Enhanced BASIC Programming Language
  • Rockwell Automation MD60 AC Drive
  • COTEK SD Series Pure Sine Wave Inverter
  • RELIANCE ELECTRIC GV3000/SE AC Drive (Version 6.06)
  • ABB SACO 16D1 Annunciator unit
  • REXROTH EcoDrive Cs series AC servo drive system
  • REXROTH EcoDrive Cs series AC servo drive system
  • REXROTH IndraControl VEP30.2/40.2/50.2 series embedded terminals
  • REXROTH IndraDyn S MSK Synchronous Motors
  • REXROTH 4WRPEH series direct acting directional valve
  • REXROTH WE 6X series directional valve
  • REXROTH VT-HNC100... 3X Series Digital Axis Controller
  • REXROTH BTV04.2 Micro Control Panel
  • REXROTH MKD series explosion-proof synchronous motor
  • REXROTH 4WRTE type electro-hydraulic proportional directional valve
  • REXRTOH IndraControl VDP 16.3, VDP 40.3, VDP 60.3 Operator Display
  • REXRTOH MSK series synchronous servo motor
  • REXRTOH ECODRIVE DKC01.1/DKC11.1 Drive Controllers
  • REXRTOH IndraDrive HMV01 series power supply unit
  • REXRTOH SE 200 Electric Tool Controller and Supporting LTH Power Unit
  • REXRTOH RAC 2 Series Spindle Drive Controller and CDH1/CGH1/CSH1 Series Milling Machine Hydraulic Cylinder
  • REXRTOH CDH1/CGH1/CSH1 series milling machine type hydraulic cylinder
  • REXRTOH MDD Digital AC Servo Motors
  • REXRTOH DIAX04 HDD and HDS Drive Controllers 2nd Generation
  • Rexroth EcoDrive 03 Series Drive Controller
  • REXRTOH Drive Controllers Control Sections CSB01, CSH01, CDB01
  • REXRTOH Axial piston variable pump A4VG Series 40
  • REXRTOH DDS02.1/03.1 Digital AC Servo Drive
  • REXRTOH VT-HPC Digital control electronics for axial piston pumps
  • REXRTOH HNC100-3X: Industrial Hydraulic and Hybrid Drive Controller
  • ABB Advant® OCS Open Control System Advant Controller 250
  • ABB QABP series low-voltage high-efficiency variable frequency dedicated motor
  • ABB AX400 series conductivity analyzer
  • ABB S500 Series Distributed Automation I/O Hardware Technical Manual
  • ABB AC500 Series PLC Module Wiring Guide Manual
  • ABB REG216/REG216 Classic Numerical Generator Protection
  • SIEMENS SIRIUS Domestic Series Control and Protection Products
  • Siemens SIMATIC SMART LINE V5 series HMI panel
  • SIEMENS CP 5613 A2/CP 5614 A2 Communication Processor
  • SIEMENS SIMOVERT MASTERDRIVES Vector Control Series
  • SIEMENS 5SN series terminal distribution product family
  • Siemens SENTRON 5SY6106-7 miniature circuit breaker
  • Siemens SIMATIC TI505/TI500 MODNIM module
  • Siemens SIMATIC ET 200SP Distributed I/O System
  • SIEMENS 5SY/5SP series miniature circuit breakers
  • Siemens SENTRON 5SY series terminal distribution
  • Siemens SIPROTEC 4 series protective relay
  • SIEMENS MICROMASTER 3rd generation Drive ES PCS7 block library DRVPCS7 SIMO_MM3 block
  • Siemens SINAMICS A10 Servo Drive System Operating Instructions
  • SIEMENS SITOP power supplies SITOP UPS1600 / UPS1100
  • SIEMENS SICAM Substation Automation
  • SIEMENS SENTRON Circuit Protection Equipment with Communication and Measurement Functions
  • SIEMENS MOBY I Configuration, Installation and Service
  • SIEMENS SIMATIC NET S7-1413 Industrial Communication Software Package
  • SINUMERIK System 800 General Interface Planning Guide
  • SIEMENS SINUMERIK 840C SIMODRIVE 611-D Installation Instructions
  • SIEMENS SIMATIC S5 S5-115U Programmable Controller
  • SIEMENS SIMATIC RF120C Communication Module Operation Guide
  • SIEMENS SIMADYN D Hardware Usage Guide
  • SIEMENS SIMATIC HMI Touch Panel TP 170A, TP 170B Operator Panel OP 170B
  • SIEMENS SIMATIC TI505/TI500 MODNIM User Manual
  • SIEMENS SIMATIC S7-1500 S7-PLCSIM Advanced
  • SIEMENS 1FK6 series three-phase servo motor
  • SIEMENS SIMATIC S7-300 Beginner's Guide
  • SIEMENS 3AH3 series vacuum circuit breaker
  • TEKTRONIX MSO5000 and DPO5000 series mixed signal oscilloscope
  • TOSHIBA Commercial Split Variable Frequency Air Conditioning (DI) Series
  • TEKTRONIX 5400 Series Oscilloscope: Classic Integration of Plug in Architecture and CRT Reading Technology
  • TOSHIBA PRODUCT GUIDE Discrete IGBTs
  • G66 Triconex Tricon Termination Enclosure
  • Triconex Tricon™ v9–v11 Systems Planning and Installation Guide
  • Fault tolerant controller based on Triconex Triple Modular Redundancy (TMR) architecture
  • Pepperl+Fuchs H-System and Schneider Electric Tricon CX
  • Technical specifications and applications of Woodward EM-80/EM-300 all electric actuator system
  • Woodward EM-80/EM-300 actuator system
  • The TRICONEX Trident series: a benchmark for redundant architecture in industrial safety instrumented systems
  • TRICONEX Trident Series Industrial Safety Instrumented Systems
  • SCHNEIDER Magelis XBT GT/GK/GH Series Human Machine Interface (HMI) Hardware Guide
  • SCHNEIDER Magelis range Graphic XBT-F / TXBT-F Instruction Manual
  • SCHNEIDER XB2-B Ø 22mm series buttons, selection switches, and indicator lights
  • SCHNEIDER APC Back-UPS Pro Premium battery backup and surge protection for your critical devices
  • SCHNEIDER Back-UPS ™ Pro 550/900/1200/1500 230V Installation and Operation
  • User Guide for SCHNEIDER Service Interface (Part Number LV485500)
  • SCHNEIDER PowerPact ™ H. Modbus Communication User Guide for J and L-type Circuit Breakers
  • SCHNEIDER TeSys D Green series AC/DC universal contactor
  • SCHNEIDER mart series low-voltage distribution products
  • SCHNEIDER TeSys ® GV2/GV3 series motor circuit breakers
  • SCHNEIDER ComPacT NSX DC Circuit Breaker 100-1200 A and Isolating Switch 100-630 A
  • SCHNEIDER Resi9 The ultimate in residential circuit protection
  • SCHNEIDER Modicon Premium Automation Platform and Unity Software
  • SCHNEIDER Modicon Quantum Safety PLC safety programmable logic controller
  • SCHNEIDER Modicon Quantum Automation Series
  • SEW MOVIDRIVE ® MD-60A industrial grade frequency converter
  • SEW MOVIDRIVE ® Technology application frequency converter
  • SEW MOVIDYN ® servo controller
  • SEW MOVIDRIVE ® MDX60B/61B frequency converter
  • SEW MOVITRAC ® B frequency converter
  • SHINKAWA VM-5 Series Monitor
  • Toshiba TE3 Series Low Voltage Digital Solid State Soft Starter User Manual
  • TOSHIBA N300 Pro NAS Internal Hard Drive
  • TOSHIBA N300 series NAS hard drive
  • TOSHIBA e-STUDIO series multifunctional digital system
  • TOSHIBA V200 Series Programmable Logic Controllers
  • TOSHIBA Unified Controller nv series™ Unified Controller nv series™
  • TOSHIBA PRODUCT GUIDE Discrete IGBTs
  • Toshiba Integrated Control System V Series Selection Manual
  • TOSBERT VF-AS3 Industrial Inverter Quick Start Manual
  • TOSHIBA VRF Dx coil interface device Service Manual
  • Toshiba T1-16S Programmable Controller I/O Module
  • Vibro Meter CE 680 M511 piezoelectric accelerometer
  • Meggitt VM600 MPS Mechanical Protection System
  • Meggitt Vibro meter VM600Mk2 Mechanical Protection and Condition Monitoring System
  • WAGO MCS Multi Connection System
  • WAGO 281-611/281-418 fuse terminal block
  • Watlow PPC-2000 Controller
  • WATLOW MLS Controller
  • Watlow 1/4 DIN specification 8-loop independent PID controller
  • Watlow Anafaze SYSTEM 32 Modular Industrial Process Controller
  • Watlow ANAFAZE 12LS type 1/8 DIN multi loop PID controller
  • Comprehensive analysis of NextMove ST motion controller
  • Baldor MotiFlex e100 Servo Drive Installation and Configuration Guide
  • Baldor FlexDrive II Servo Drive Technology Explanation and Application Guide
  • Baldor MicroFlex servo drive