K-WANG

+086-15305925923
Service expert in industrial control field！
English 简体中文
Product
Article
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence 
Ship control system
Equipment control system
Power monitoring system
Home >> GE >> GE FANUC I/O Types
Current position：
   
Brand
GE FANUC I/O Types
❤ Add to collection

GE FANUC I/O Types

+86-15305925923
Mr.Wang
wang@kongjiangauto.com

General purpose I/O is used for both turbine applications and process control. 

Turbine-specific I/O is used for direct interface to the unique sensors and actuators 

on turbines. This reduces or eliminates a substantial amount of interposing 

instrumentation. As a result, many potential single point failures are eliminated in the 

most critical area for improved running reliability and reduced long-term 

maintenance. Direct interface to the sensors and actuators also enables the 

diagnostics to directly interrogate the devices on the equipment for maximum 

effectiveness. This data is used to analyze device and system performance. Also, 

fewer spare parts are needed.

￥176474.00
￥16675.00
Weight：3.500KG
Quantity：
(Inventory: 55)
Consultation
Product parameters
  • Telephone:+86-15305925923
  • contacts:Mr.Wang
  • Email:wang@kongjiangauto.com
Description

General purpose I/O is used for both turbine applications and process control. 

Turbine-specific I/O is used for direct interface to the unique sensors and actuators 

on turbines. This reduces or eliminates a substantial amount of interposing 

instrumentation. As a result, many potential single point failures are eliminated in the 

most critical area for improved running reliability and reduced long-term 

maintenance. Direct interface to the sensors and actuators also enables the 

diagnostics to directly interrogate the devices on the equipment for maximum 

effectiveness. This data is used to analyze device and system performance. Also, 

fewer spare parts are needed.

GE FANUC I/O Types

I/O Type - General Purpose Board
Redundant
Packs/Boards
24 DI (125 V dc, group isolated) 1 ms SOE TBCIH1 1 or 2 or 3
24 DI (24 V dc, group isolated) 1 ms SOE TBCIH2 1 or 2 or 3
24 DI (48 V dc, group isolated) 1 ms SOE TBCIH3 1 or 2 or 3
24 DI (115/230 V ac, 125 V dc, point isolated) 1 ms SOE on 125 V dc TBCIH1 1 or 2 or 3
24 DI (24 V dc, point isolated) TBCIH2 1 or 2 or 3
24 DI (24 V dc, group isolated) STCIH1 1
12 C mechanical relays w/6 solenoids, coil diagnostics (115/230 V ac, 24/125 V dc) TRLYH1B 1 or 3
12 C mechanical relays w/6 solenoids, voltage diagnostics (115/230 V ac, 125 V dc) TRLYH1C 1 or 3
12 C mechanical relays w/6 solenoids, voltage diagnostics (24 V dc) TRLYH2C
6 A mechanical relays for solenoids, solenoid impedance diagn. (24/125 V dc) TRLYH1D 1 or 3
12 A solid-state relays/inputs (115/230 V ac) TRLYH1E 1 or 3
12 A solid-state relays/inputs (125 V dc) TRLYH2E 1 or 3
12 A solid-state relays/inputs (24 V dc) TRLYH3E 1 or 3
36 mechanical relays, 12 voted form A outputs TRLYH1F 3
12 fused branches WPDFH1A
36 mechanical relays, 12 voted form B outputs TRLYH2F 3
12 fused branches WPDFH2A
10 AI (V/I inputs) and (2AO (4-20/0-200 mA outputs) TBAIH1C 1 or 2 or 3
10 AI (V/I inputs) and (2AO (4-20/0-200 mA outputs) STAIH1A 1 or 2 or 3
16 AO (4-20 mA outputs) 8 per I/O pack TBAOH1C 1 or 2
8 AO (4-20 mA outputs) STAOH1A 1
12 thermocouples TBTCH1B 1 or 2 or 3
24 thermocouples (12 per I/O pack) TBTCH1C 1 or 2
12 thermocouples STTCH1A 1
16 RTDs 3 wires/RTD (8 per I/O pack) TRTDH1C 1 or 2
8 RTDs 3 wires/RTD SRTDH1A 1
6 serial ports for I/O drivers RS-232, RS422, RS485 SSCAH1A 1
10/2 analog I/O - HART communications SHRAH1A 1
PROFIBus communications SPIDH1A 1
I/O Type - Turbine Board
Redundant
Packs/Boards
Mixed I/O: 4 speed inputs/pack, synchronizing, shaft V/I monitor TTURH1C 1 or 3
2 servo channels: up to 3 coils, 4 LVDTs/channel, includes excitation TSVCH1A 1 or 3
8 vibration (seismic, proximity, accel.), 4 position, 1 reference probe, buffered out TVBAH1A 1 or 2 or 3


Features
• Single board including:
Main Processor
Control Network Communications - Ethernet
IO Network Communications – Ethernet
USB and COM ports
• Processor: Freescale 8349, 667MHz
• Operating system: QNX
• Base mounting
• Status LEDs
Environment
• Operating temperature 0°C to +65 °C
• No fans required
Features
• Single board including:
Main Processor
Control Network Communications - Ethernet
IO Network Communications – Ethernet
USB and COM ports
• Processor: Freescale 8349, 667MHz
• Operating system: QNX
• Base mounting
• Status LEDs
Environment
• Operating temperature 0°C to +65 °C
• No fans required
Mark VIe Controller
The single-board controller is a
compact and flexible design for
processing and network
communications.
The controller is a single board, which is base-mounted in the cabinet. For dual and
triple redundant systems, a second and third board can be mounted adjacent for a
compact packaging arrangement. An 8349, 667 MHz processor is provided with a
QNX operating system. The board is powered by 18-36 V dc, 12 watt source.
This rugged design is rated for an operating range of 0 to 65°C (32 to 149 °F) to
match the maximum operating temperature of the I/O modules. Also, it does not
require any cooling fans even at maximum temperature, and is suitable for NFPA
Class 1, Div. 2 applications.
Each controller has three 100 MB Ethernet drivers for the IONet, so that each
controller can communicate with up to three network switches. In redundant systems,
this allows each controller to monitor redundant inputs directly and compare them
for any potential discrepancies. Connectors are color-coded and labeled to simplify
maintenance.
Controllers also have two Ethernet drivers for the control network to communicate
peer-to-peer with other Mark VI, Mark VIe, and EX2100 generator excitation
controls, as well as operator and maintenance stations. Controllers can be
synchronized between units or to a local or remote time source for accurate plantwide sequence of events monitoring.
I/ONet
Switches manage the
communication traffic to
eliminate collisions and
increase network determinism
Communication between the controller and the I/O packs is performed with the
internal IONet. This is a 100 MB Ethernet network available in non-redundant, dual
redundant, and triple redundant configurations. Ethernet Global Data (EGD) and
other protocols are used for communication. EGD is based on the UDP/IP standard
(RFC 768). EGD packets are broadcast at the system frame rate from the controller
to the I/O packs, which respond with input data.
IONet conforms to the IEEE 802.3 standard. It is supplied as 100BaseTx and
100BaseFx (fiber) for greater distances, noise rejection, lightning immunity, and
ground immunity. A star topology is used with the controller on one end, a network
switch in the middle, and I/O packs at the end.
Controller
U
C
C
A
Switch
IONet - Cat. 5
100 m/328 ft
IONet - Cat. 5
100 m/328 ft
Pack
Field Wire
300 m/984 ft
Field
Device
Controller
U
C
C
A
Switch
IONet - Cat. 5
100 m/328 ft
IONet - Cat. 5
100 m/328 ft
or
100FX Fiber
2,000 m/6,600 ft
Switch
IONet - Cat. 5
100 m/328 ft
Pack
Field Wire
300 m/984 ft
Field
Device
Local I/O
Distributed I/O
TB
TB
Maximum IONet Distances Including Field Devices
Industrial grade switches are used for the IONet that meet the codes, standards,
performance, and environmental criteria for industrial applications including an
operating temperature of -40°C to 85°C (-40 °F to 185 °F) and Class 1, Div. 2.
Switches have provision for redundant 10 to 30 V dc power sources (200/400 mA)
and are mounted on a DIN-rail. LEDs indicate the status of the IONet link, speed,
activity, and duplex.
100BaseTx 100BaseFx
IEEE specification 802.3u 802.3u
Wire speed 100 Mbps 100 Mbps
Cable type UTP Cat. 5 Fiber (multi-mode)
Connector type RJ-45 SC
Maximum length of a segment at full-duplex 100 m/328 ft 2 km/6,600 ft
Maximum taps per segment 2 2
Maximum I/O packs per network 199 199
Maximum number of switches 2 2
Topology Star Star
  • LTi DRiVES ServoOne single axis servo drive
  • OMRON C-series/CVM1/CV series analog I/O units
  • Siemens SINUMERIK 840C+SIMODRIVE 611-D Installation Guide
  • ABB ACS550 frequency converter
  • OMRON SYSMAC NX series NX1P2 CPU unit
  • Fuji FRENIC Mini Inverter
  • Braided Flexible Connections
  • Mecc Alte MC200 Controller
  • Schneider Square D 9036/9037/9038 Electromechanical Liquid Level Controller
  • Pilz PSS 4000 Automation System
  • Schneider TeSys Giga GV5/GV6 motor protection circuit breaker
  • Eaton Freedom NEMA Contactor and Starter Specification
  • OMRON D4SL-N Safety Door Switch (Including Locking) Specification
  • NI CompactRIO Embedded System
  • I/O module of Emerson Ovation distributed control system
  • MITSUBISHI MELSEC A series PLC（MELSEC-A）
  • Specification for Automation Direct DL06 Series Micro PLC (D0-06DD1)
  • IFM CR2530 SmartController Installation Manual
  • OMRON FH/FHV series visual sensor controller
  • PILZ PDP67 F 4 code operation instructions
  • Panasonic FP-X series PLC
  • OMRON CK3W-AX Axis Interface Unit Specification
  • EPSON RC90/RC90-B Robot Controller
  • Nthytronic Group iRTUe Modular I/O Expansion Unit
  • Schneider Altivar Machine ATV320 frequency converter
  • Eaton Cutler Hammer Pull SPB Automatic Transfer Switch (ATS) Operation and Maintenance
  • GFS Corp EVO-SP 2600 Diesel Generator Set Natural Gas Conversion System Specification
  • OMRON SYSMAC CJ Series CJ2 CPU Unit Hardware
  • Lenze ECS servo frequency converter
  • GE EX2100e excitation control system 35A/120A regulator
  • OMRON G3PW Power Controllers
  • MITSUBISHI FX3GE MELSEC Compact PLC
  • BECKHOFF EP23xx series IP67 protection level EtherCAT Box digital input/output module
  • MITSUBISHI MDS-A/B Series CNC AC Servo/Spindle System
  • TOYO's full range of valve products
  • SIEMENS SIMODRIVE 611 Universal/Universal E Full Series Digital Drive Control Board
  • SIEMENS SINUMERIK 840C SIMODRIVE 611-D Installation Guide
  • FANUC 0i Model F Universal CNC Control System
  • Schneider Modicon TM3 Expansion I/O modules for Modicon M221, M241, M251 and M262 controllers
  • R&S®EPL1000 EMI TEST RECEIVER
  • Baum ü llerb maXX series modular servo drive and automation platform
  • Huichuan AM600 motion controller
  • Allen Bradley Ultra3000 Servo System Design Guide
  • NEC NL8060BC26-17 LCD Module
  • ABB Jokab Pluto Safety PLC
  • OMRON NE1A Series Secure Network Controller Operation Manual
  • Allen Bradley 2711P series PanelView Plus human-machine interface terminal
  • NI cFP-2200/2210/2220 Compact FieldPoint Intelligent Real time Controller
  • Installation Instructions for KEYENCE XG-8000 Series Line Scan Camera Version Vision System
  • Omron G9SX series flexible safety unit
  • OMRON SYSMAC CPM1A series programmable controller
  • ABB ACH550 frequency converter installation, operation and maintenance instructions
  • IDEC MicroSmart FC6A PLC CPU Module
  • Gefran GILOGIK II Distributed I/O and Control System
  • GE VersaMax Nano/Micro PLC
  • Nastyaer GIV50-11 Position Limit Switch
  • Rockwell Trusted T8111 TMR Processor
  • TIANMA NL8060BC21-11KG 8.4-inch TFT LCD module
  • CapXon UJ series aluminum electrolytic capacitors
  • FLVOTEK MV10H series DC/DC power module
  • SIEMENS QBE3000-D/QBE3100-D Differential Pressure Sensor
  • Huichuan H3U series PLC
  • Phoenix ILC 1X1 Series Inline Controller
  • Allen‑Bradley Lifeline ™ 4 Pull rope emergency stop switch
  • Gardner Denver DELCOS 3100 Controller
  • Mitsubishi GOT2000 series graphic operation terminal
  • EBW Series current detection resistor
  • Mitsubishi MELSEC AnS (H) series CPUs
  • Honeywell TN3801 Electric Pneumatic Liquid Level Measurement Cabinet
  • ABB PSR/PSRC/PSE/PSTX series soft starter
  • GE HYDRAN ® 201i Transformer Online Monitoring System
  • ABB NextMove ESB-2 motion controller
  • CAREL PGD graphic display handheld device
  • Hiossen EK implant system
  • Eaton 9PX Series UPS Installation and User Instructions
  • Airlec RYP series precision pressure reducing valve
  • Schneider Modicon M258 Logic Controller
  • KEYENCE XG-7000/8000 Series Visual System New Function Manual
  • Alfa Laval EPC 70 upgrade for separators with EPC 50
  • Nidec Unidrive M700/M701/M702 frequency converter
  • Mitsubishi A171SCPU Motion Controller
  • YASKAWA DX200 Robot Function Pack Manual
  • CKD AxTools servo debugging software (EboDEX)
  • IUSA Cambridge Lee Copper Tube
  • TAIYO LX series brushless AC generator
  • Automate Direct DL06 Micro PLC
  • Kepco BOP Bipolar Power Supply Operating Instructions
  • Pilz PNOZmulti Classic/Mini Safety Mini Controller
  • HMS Airbus X-gateway Industrial Protocol Gateway
  • Nidec Control Techniques Unidrive SP AC Variable Frequency Governor
  • GE SPEEDTRONIC ™ Mark VI Gas/Steam Turbine Control System
  • Instructions for using LK-TECH MGv2 servo motor
  • Zebra EPL2 Programming Language Programming Guide
  • How to install Elmo Gold Whistle digital servo drive?
  • MITSUBISHI ELECTRIC FR-D700 frequency converter
  • Edwards EST3 Emergency Communication and Life Safety Platform
  • ABB ACS380 mechanical frequency converter
  • MITSUBISHI ELECTRIC MELSEC iQ-R/System Q/L series PLC family
  • Rockwell Automation Bulletin 5069 Series Controllers
  • CODESYS Control Win SL
  • ABB AC 800M controller and communication interface
  • Honeywell 7800 Series EC/RM7830A/7850A Combustion Relay Module
  • Rockwell AutoMax Distributed Power Drive System Manual
  • SNO 4062 K/KM safety relay
  • World Encoders iPHD/iHDW series handheld electronic handwheel
  • Copes Vulcan turbine bypass system (CV-1163)
  • ZF Marine MM9000 ClearCommand Marine Propulsion Control System
  • Pro face GP-2400/2500/2600 Series Operating Manual
  • TI C2000 CLA Software Development Guide
  • Honeywell ControlEdge HC900 Controller
  • Metso DNA Device Status Monitoring System
  • ABB Millmate Rolling Mill Force Measurement System
  • Reliance Electric GV3000/SE AC Inverter
  • EUCHNER handheld operating unit and electronic handwheel
  • GE Fanuc Automation VersaMax ® I/O and Control
  • Microchip dsPIC30F series 16 bit high-performance digital signal controller
  • Milacron ELEKTRON 400/500/600 series fully electric injection molding machine
  • PRECILEC RE.0444N series DC tachometer generator
  • Mitsubishi GOT2000/GOT1000 series serial communication unit
  • Keyence GS series safety interlock switch
  • GE AT868 AquaTrans ™ Single/dual channel ultrasonic water flow transmitter
  • MITSUBISHI ELECTRIC GOT1000 Series Connection Manual
  • Allen Bradley Guardmaster GSR Safety Relay
  • Delta AH500 PLC Operating Instructions
  • Pilz PNOZmulti series safety control system
  • Operation Instructions for Pilz PNOZ XV3P Safety Relay
  • Pilz PZE 9 Safety Relay Expansion Module
  • SCHNEIDER TSX Premium P57 Processor and Discrete I/O Modules