GE 109W3914P002 Advanced Programmable Logic Controller Module

GE 109W3914P002 Advanced Programmable Logic Controller Module

Product Type:PLC Module Model Number:109W3914P002 Manufacturing Brand:General Electric (GE) Operating System:GE Intelligent Platforms Processor Speed:Up to 100 MHz Memory Capacity:2 MB RAM, 1 MB Flash ROM Input/Output Count:100 inputs, 64 outputs Power Consumption:1.8 Watts Communication Interface:RS-485, Ethernet Operating Temperature:-20"C to 55"C Storage Temperature:-40"C to 70"C Dimensions (LxWxH):13.5 x 6.5 x 4.5 cm Weight:0.25 kg Certifications:UL, CE, ISO 9001 The GE 109W3914P002 PLC module is engineered for precision control in a wide range of industrial settings. Its compact design and high-speed processing capabilities make it an ideal choice for complex automation tasks. 

 Equipped with a robust communication interface, this module ensures seamless integration with other industrial systems, enhancing efficiency and reducing downtime. With its extensive memory capacity and flexible programming options, the GE 109W3914P002 allows for sophisticated logic operations and data management, making it suitable for applications requiring high computational power. Designed to withstand harsh conditions, this PLC module operates within a broad temperature range (-40"C to +85"C), ensuring reliable performance even in extreme environments. The module  compact size and lightweight construction facilitate easy installation and maintenance, minimizing disruption to production processes. It also meets international safety standards, including UL and CE certifications, guaranteeing compliance and peace of mind for users worldwide. The GE 109W3914P002 PLC module is designed for precision control applications in industrial settings, offering high performance and reliability for automation systems.

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module