GE DS3800HSCG1E1F ISOLATOR BOARD High Performance, Precision Control Module

GE DS3800HSCG1E1F ISOLATOR BOARD High Performance, Precision Control Module

Board Type:High Level Isolator Model:DS3800HSCG1E1F Category:GE Boards & Turbine Control Application:Mark IV DS3800 Operating Temperature:-40"C to +70"C Input Voltage Range:24V DC Output Current Capacity:50mA Failure Modes:Non-Isolated Input Manufacturing Standards:IEEE, IEC The GE DS3800HSCG1E1F ISOLATOR BOARD is designed with precision and reliability at its core, making it an indispensable component in high-level industrial control systems. Featuring superior isolation technology, this board safeguards against electrical disturbances, ensuring the uninterrupted operation of critical processes. 

 Crafted from high-grade materials, the board is built to withstand extreme environmental conditions, guaranteeing long-lasting performance in various industrial settings. With its robust design and advanced isolation capabilities, the DS3800HSCG1E1F board optimizes system efficiency, reducing downtime and maintenance costs. Easy to integrate into existing systems, it offers seamless compatibility with a wide range of industrial control applications, enhancing overall operational effectiveness. The GE DS3800HSCG1E1F Isolator Board is engineered for critical industrial control systems, offering unparalleled isolation capabilities and enhanced system reliability. 

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).