GE IC200CPUE05-FH CPU with Embedded Ethernet Interface, Advanced Control & Networking Solution

GE IC200CPUE05-FH CPU with Embedded Ethernet Interface, Advanced Control & Networking Solution

Processor Type:High-speed CPU Embedded Ethernet Interface:10/100 Mbps Operating Temperature Range:-40"C to +85"C Power Consumption:10W (max) Dimensions:125mm x 125mm x 28mm Weight:1.2kg Memory Capacity:1MB RAM, 2MB Flash The GE IC200CPUE05-FH is a compact and robust CPU module, engineered to provide high-speed processing and efficient control solutions in demanding industrial environments. 

 Equipped with an embedded Ethernet interface, this module ensures reliable and fast data exchange between the controller and other devices on the network, enhancing system scalability and connectivity. Featuring an impressive processing speed of at least 128 MHz, it delivers quick response times and smooth operation, ideal for complex control tasks. With built-in 8 KB RAM and 16 KB Flash ROM, the IC200CPUE05-FH offers ample memory for storing programs and data, supporting efficient operation without the need for external storage. Operated within a wide temperature range of -40"C to +70"C and withstanding high humidity levels up to 95% RH, this CPU module is designed for durability and reliability in various industrial settings. The GE IC200CPUE05-FH CPU with Embedded Ethernet Interface is a high-performance core component for industrial control systems, enabling seamless integration and communication within complex automation environments. 

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS

 or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required

Features 

 Single slot CPU 

 Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)  Supports floating point calculations 

 Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs 

 0.4 microseconds per boolean function 

 64 MHz, 80486DX2 microprocessor 

 Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only) 

 Programmed by MS-DOS, or Windows

 software products running on Windows

 95 or Windows NT

 over Ethernet TCP/IP or through the SNP port. 

 Configurable data and program memory 

 Battery-backed calendar clock 

 Three position operation mode switch 

 Password controlled access 

 Remote programmer keyswitch memory protection 

 Four status LEDs 

 Software configuration (No DIP switches or jumpers) 

 Reference information inside front door 

 In-system upgradable firmware