GE IS215VPROH2BC Emergency Protection Board for Turbine Control, Mark VI System

GE IS215VPROH2BC Emergency Protection Board for Turbine Control, Mark VI System

Board Type:Emergency Trip or Turbine Protection Board Frame Rate:Up to 100 Hz Functional Acronym:VPRO MPU Input Circuit Sensitivity:Min. 27 mV peak at 2 Hz Power Supply Rating:125 VDC Redundancy System:Simplex or TMR Response Time for Solenoids:Solenoid L/R Time Constant at 0.1 sec Mark VI Trip Solenoids:Quantity Six per VPRO (Three per TREG) Engineered by GE for superior reliability and performance, the IS215VPROH2BC Emergency Turbine Protection Board is a critical component in maintaining safety protocols within industrial operations. Designed for the Mark VI Series, this board ensures quick and precise emergency shutdown procedures, safeguarding against potential hazards and damage. 

 Featuring a robust three-pin sub-D connector, the IS215VPROH2BC simplifies the connection process, enhancing efficiency and reducing downtime. With a frame rate up to 100 Hz, this board guarantees rapid response times, crucial for immediate safety actions in high-pressure environments. The VPRO acronym signifies its primary role in monitoring and safeguarding against potential turbine malfunctions, offering peace of mind for operators and maintenance personnel alike. Crafted from durable materials for longevity and strength, the IS215VPROH2BC is built to withstand the rigors of industrial applications, ensuring dependable service throughout its operational life. The GE IS215VPROH2BC is a critical component designed for emergency turbine protection in Mark VI systems, ensuring safety and reliability in industrial applications.

Features 

▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user  memory. 

▪ Provides access to bulk memory via reference table %W. 

▪ Configurable data and program memory. 

▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. 

▪ Supports auto-located Symbolic Variables that can use any amount of user memory. 

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for  analog %AI and %AQ. 

▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a  list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223. 

▪ Supports all VME modules supported by Series 90-70. 

▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server  and FTP connections. 

▪ Supports up to 512 program blocks. Maximum size for a block is 128KB. 

▪ Test Edit mode allows you to easily test modifications to a running program. 

▪ Bit-in-word referencing. 

▪ Battery-backed calendar clock. 

▪ In-system upgradeable firmware. 

▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232  Ethernet station manager serial port. 

▪ The embedded Ethernet interface provides: 

- Data exchange using Ethernet Global Data (EGD) 

- TCP/IP communication services using SRTP 

- Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client 

- Full programming and configuration services 

- Comprehensive station management and diagnostic tools 

- Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network  switch providing auto-negotiated network speed, duplex mode, and crossover detection. 

- User-configurable Redundant IP address 

- Time synchronization to SNTP time server on Ethernet network (when used with  Release 5.00 or later CPU module).