GE IS220PAOCHA1A Industrial I/O Pack for Turbine Control

GE IS220PAOCHA1A Industrial I/O Pack for Turbine Control

Brand:General Electric Model:IS220PAOCHA1A Sub-Type:I/O Pack Application:Turbine Control Systems Technology:Advanced Digital Control Interface:Ethernet Power Consumption:15W Dimensions:14cm x 12cm x 3cm Weight:0.4kg Operating Temperature:-20"C to +60"C Input Voltage Range:DC 24V Number of Inputs/Outputs:16/16 Communication Protocol:MODBUS RTU/TCP Certifications:UL, CE, ISO 9001 Unmatched Reliability The IS220PAOCHA1A is designed with high-quality materials and robust construction to withstand the harsh conditions typical in industrial environments. 

 Advanced Connectivity Equipped with a wide range of communication protocols, including Modbus RTU, for seamless integration with existing systems. Customizable Functionality This I/O pack offers a flexible configuration to adapt to diverse turbine control needs, ensuring optimal performance across various applications. Efficient Data Management With its advanced data handling capabilities, the IS220PAOCHA1A ensures accurate and timely data transmission, critical for effective monitoring and control. User-Friendly Design The intuitive interface simplifies installation and maintenance, reducing downtime and enhancing operational efficiency. The GE IS220PAOCHA1A I/O Pack is a critical component for turbine control systems, designed to enhance operational efficiency and reliability. This pack is specifically engineered for seamless integration into complex industrial processes, ensuring precise data acquisition and control signals. 

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module