GE Fanuc IC660BBD120 High-Speed Counter Module, PLC Technology

GE Fanuc IC660BBD120 High-Speed Counter Module, PLC Technology

Product Type:High-Speed Counter Model:IC660BBD120 Manufacturer:GE Fanuc Type Designation:PLC Number of Inputs:12 Input Voltage Range:5VDC-30VDC Input Signal Voltage:5V DC to 30V DC Number of Outputs:4 Output Voltage:4.75 VDC  5.25 VDC Output Current:0.5 A Analog Input Capacity:N/A Communication Protocol:N/A Power Supply Voltage:N/A Operating Temperature:-10"C to +55"C Storage Temperature:-40"C to +70"C The GE Fanuc IC660BBD120 is engineered with high-performance capabilities to meet the demanding needs of industrial automation. This precision counter block is equipped with 12 inputs and 4 outputs, ensuring reliable data processing in real-time applications. 

 Crafted with robust materials, this module is designed for durability and longevity, guaranteeing consistent performance under various environmental conditions. With an input voltage range of 5VDC to 30VDC and an output voltage between 4.75VDC and 5.25VDC, the IC660BBD120 offers flexibility in interfacing with a wide array of industrial devices. The 12 input channels are capable of handling diverse types of signals, making it versatile for different measurement requirements in manufacturing processes, quality control, and process monitoring. 

 The 4 output channels are designed to drive actuators or control signals efficiently, supporting seamless integration with PLCs and other control systems in your production line. Optimized for speed and accuracy, the GE Fanuc IC660BBD120 is an indispensable component in any facility requiring precise timing and synchronization, enhancing productivity and efficiency. The GE Fanuc IC660BBD120 is a high-speed counter module designed for industrial control systems, providing precise timing and measurement capabilities for complex processes.  

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS

 or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required

Features 

 Single slot CPU 

 Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)  Supports floating point calculations 

 Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs 

 0.4 microseconds per boolean function 

 64 MHz, 80486DX2 microprocessor 

 Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only) 

 Programmed by MS-DOS, or Windows

 software products running on Windows

 95 or Windows NT

 over Ethernet TCP/IP or through the SNP port. 

 Configurable data and program memory 

 Battery-backed calendar clock 

 Three position operation mode switch 

 Password controlled access 

 Remote programmer keyswitch memory protection 

 Four status LEDs 

 Software configuration (No DIP switches or jumpers) 

 Reference information inside front door 

 In-system upgradable firmware