GE IC755CSW07CDACA-CG QuickPanel+ Industrial HMI Device

GE IC755CSW07CDACA-CG QuickPanel+ Industrial HMI Device

Brand & Model:GE IC755CSW07CDACA-CG Device Type:Industrial HMI Operating System:GE Intelligent Platform Display Size:7 inches Resolution:800脳480 pixels Touch Screen Technology:Capacitive Processing Power:Dual-core ARM Cortex-A9 Memory:1GB RAM, 8GB eMMC storage Connectivity:Ethernet, Wi-Fi, Bluetooth Power Supply:12-24V DC Operating Temperature:-20"C to +55"C Humidity Range:5% to 95% non-condensing The GE IC755CSW07CDACA-CG QuickPanel+ is equipped with a high-resolution 7-inch touchscreen display, providing clear and crisp visuals for efficient monitoring and operation. 

 It runs on a robust Windows CE operating system, ensuring compatibility with a wide range of industrial applications and software. Featuring ample memory with 128 MB of RAM and 128 MB of Flash storage, this device can handle complex tasks and large data sets without lagging or freezing. Equipped with multiple communication ports including RS-232, RS-485, and Ethernet, it seamlessly integrates with existing control systems and offers versatile connectivity options. With its IP65 rating, the QuickPanel+ is built to withstand harsh industrial environments, offering protection against dust and water splashes.

 The compact yet sturdy design allows for easy installation and mounting in various locations within the industrial setup. It supports USB host functionality for connecting additional devices and a micro SD slot for expandable storage. The GE IC755CSW07CDACA-CG QuickPanel+ is an advanced industrial Human Machine Interface (HMI) device designed for seamless integration into complex industrial automation systems. It offers intuitive operation, enhanced connectivity, and robust performance for efficient monitoring and control applications. 

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module