GE IS210JPDHG1A Distributed I/O Module
3 Distributed I/O Module Instructionsapplicable instructions in Conditions of Safe Use and within the specific section for each piece of equipment for proper use of
this equipment in these locations.
3.1 PAIC and YAIC Analog I/O Modules
The following I/O pack and terminal board combinations are approved for use in hazardous locations:
• Mark VIe Analog I/O pack IS220PAICH1A
with terminal boards (accessories) IS200STAIH1A, IS200STAIH2A, or IS200TBAIH1C
• Mark VIe Analog I/O pack IS220PAICH1B
with terminal boards (accessories) IS200STAIH1A, IS200STAIH2A, or IS200TBAIH1C
• Mark VIeS Safety Analog I/O pack IS220YAICS1A
with terminal boards (accessories) IS200STAIS1A, IS400STAIS1A, IS200STAIS2A, IS400STAIS2A,
IS200TBAIS1C, or IS400TBAIS1C
• Mark VIeS Safety Analog I/O pack ISx2yYAICS1B (where x = 2 or 4 and y = 0 or 1)
with terminal boards (accessories) ISx0ySTAIS1A, ISx0ySTAIS2A, or ISx0yTBAIS1C
3.1.1 Electrical Ratings
Item Min Nominal Max Units
Power Supply
Voltage PAICH1B / YAICS1B: 22.5
PAICH1A / YAICS1A: 27.4
PAICH1B / YAICS1B: 24.0/28.0
PAICH1A / YAICS1A: 28.0 28.6 V dc
Current — — 0.49 A dc
Analog Inputs (1-8)
Voltage -10 — 10 V dc
Current 0 — 20 mA dc
Analog Inputs (9-10)
Current -5 — 5 V dc
Current -1 — 20 mA dc
Analog Outputs
Voltage 0 — 16.3 V dc
Current 0 — 20 mA dc
Analog Transmitter Power
Voltage 22.8 24.0 25.2 V dc
Current — — 21 mA dc
3.1.2 Field Wire Connections
Terminal Board Terminal Block Type
ISx00STAI_1A, ISx00STAI_2A Refer to the table Euro Style Box-type Terminal Blocks for wire size and screw torques.
ISx00TBAI_1C Refer to the table Barrier-type Terminal Blocks for wire size and screw torques.

3.5 PCNO CANopen® Master Gateway Module
The following I/O pack and terminal board combinations are approved for use in hazardous locations:
• CANopen I/O pack IS220PCNOH1A or IS220PCNOH1B with accessory ID board IS200SPIDG1A
3.5.1 Electrical Ratings
Power Supply
Item Min Nominal Max Units
Voltage 27.4 28.0 28.6 V dc
Current — — 0.17 A dc
3.6 PDIA and YDIA Discrete Input Modules
The following I/O pack and terminal board combinations are approved for use in hazardous locations:
• Mark VIe Discrete I/O pack IS220PDIAH1A
with terminal boards (accessories) IS200STCIH1A, IS200STCIH2A, IS200STCIH8A, IS200TBCIH2C, or
IS200TBCIH4C
• Mark VIe Discrete I/O pack IS220PDIAH1B
with terminal boards (accessories) IS200STCIH1A, IS200STCIH2A, IS200STCIH8A, IS200TBCIH2C,
IS400TBCIH2C, IS200TBCIH4C, IS400STCIH1A, IS400STCIH2A, or IS400STCIH8A
• Coated Mark VIe Discrete I/O pack IS221PDIAH1B
with coated terminal boards (accessories) IS201STCIH1A, IS201STCIH2A, IS201STCIH8A, IS201TBCIH2C, or
IS201TBCIH4C
• Mark VIeS Safety Discrete I/O pack IS220YDIAS1A
with terminal boards (accessories) IS200STCIS1A, IS200STCIS2A, IS400STCIS1A, IS400STCIS2A,
IS200TBCIS2C, or IS400TBCIS2C
• Mark VIeS Safety Discrete I/O pack ISx2yYDIAS1B (where x = 2 or 4 and y = 0 or 1)
with terminal boards (accessories) ISx0ySTCIS1A, ISx0ySTCIS2A, IS40ySTCIS4A, ISx0yTBCIS2C, or
IS40yTBCIS3
3.6.1 Electrical Ratings
PDIAH1A and PDIAH1B
Item Min Nominal Max Units
Power Supply
Voltage PDIAH1B: 22.5
PDIAH1A: 27.4
PDIAH1B: 24.0/28.0
PDIAH1A: 28.0 28.6 V dc
Current — — 0.24 A dc
Contact Inputs
Voltage 0 — 32 V dc
STCIH1A, STCIH2A, TBCIH2C Contact Wetting Outputs
Voltage 18.5 — 32 V dc
Current — — 110 mA dc
STCIH8A, TBCIH4C Contact Wetting Outputs (1-21)
Voltage — — 31 V dc
Current — — 10 mA dc
STCIH8A, TBCIH4C Contact Wetting Outputs (22-24)
Voltage — — 31 V dc
Current — — 41 mA dc
YDIAS1A
Item Min Nominal Max Units
Power Supply
Voltage 27.4 28.0 28.6 V dc
Current — — 0.24 A dc
Contact Inputs
Voltage 0 — 32 V dc
Contact Wetting Outputs
Voltage PDIA — 32 V dc
Current — — 110 mA dc
YDIAS1B
Item Min Nominal Max Units
Power Supply
Voltage 22.5 28.0 28.6 V dc
Current — — 0.24 A dc
Contact Inputs/Wetting (via JE1) STCIS1, STCIS2, TBCIS2
Voltage 20 24 32 V dc
Current — — 110 mA dc
Contact Inputs/Wetting (via JE1) STCIS4, TBCIS3
Voltage 43 48 52.8 V dc
Current — — 110 mA dc