KEBA FE570 FE571 FE572 FE573 Fieldbus master extension modules

KEBA FE570 FE571 FE572 FE573 Fieldbus master extension modules

Brief description The fieldbus master modules are left-side plug-in modules for the KeControl C5 series which make it possible to build a  wide range of systems and machines when using different fieldbus components.  The FE 57x expansion cards allow additional EtherCAT master interfaces on the CPU. Thus, there are no restrictions  even with extensive EtherCAT configurations. The EtherCAT interfaces can be supplied either with M8 or with RJ45 connector(s). Depending on the requirement, individual industrial suitability can thus be achieved. The FE 571 and the FE 573 have the possibility to have an integrated switch on board. This allows a star distribution of  the EtherCAT slaves without additional hardware.

KeControl C5 - FE 560 Real-time Ethernet slave extension module

Produkteigenschaften •  1 x EtherCAT / Ethernet IP / Profinet / Sercos Slave (2 x RJ 45) •  Connector for KeControl CPU modules Environmental conditions Operationg temperature 0 °C to +55 °C Storage temperature -40 °C to +70 °C Relative air humidity 10 % to 95 % (non condensing) Vibration / shock resistance According to EN 61131-2 Brief description The FE 560 is an Ethernet fieldbus slave module that can be plugged in on the left side for the KeControl C5 series. The use of this module enables the connection to higher-level control systems. Process data from the master can be received and further processed by the KeControl C5 controller. All relevant protocols  such as EtherCAT, Ethernet / IP, Sercos III and Profinet are supported. Specifications

Product features •  1 x Sercos III Master (2 x RJ45) interface •  Connector to KeControl CPU Module Environmental conditions Operationg temperature 0 °C to +55 °C Storage temperature -40 °C to +70 °C Relative air humidity 10 % to 95 % (non condensing) Vibration / shock resistance According to EN 61131-2 Brief description The FE 580 is a fieldbus master module for the KeControl C5 series which can be added on the left side. This expansion  card enables an additional Sercos III master interface which means that Sercos III drives, for example, can be operated  parallel to EtherCAT I/Os.