MOOG M3000 Control System Analog I/O Extension Module

MOOG M3000 Control System Analog I/O Extension Module

Qualified project planning and design, proper transport, storage, installation, use

and careful maintenance are essential to the flawless and safe operation of the

automation system.

The automation system may only be used within the scope of the data and applica-

tions specified in the present documentation and associated user manuals.

The automation system is to be used only as follows:

as prescribed,

in technically flawless condition,

without arbitrary or unauthorised changes and

exclusively by qualified users

The regulations of the German professional and trade associations, the German

technical supervisory board (TÜV),the VDE (Association of German electricians)

or other corresponding national bodies are to be observed.

Safety-oriented (fail-safe) systems

Particular measures are required in connection with the use of SPC in safety-

oriented systems. lf an SPC is to be used in a safety-oriented system, the user

ought to seek the full advice of theSPC manufacturer in addition to observing any

standards or guidelines on safety installations which may be available.

2.

Analog I/O expansion module

2.1. Overview

Order number

For replacement parts, the order/item no. can be found on the module's namepla

Function

The module is used to expand the analog I/O level of Cell Controllers.

The modules are connected by direct E-bus coupling and is available with voltag

or current inputs.

Features

Common characteristics

4 analog output channels

in the form of voltage outputs, +/-10 V (GND sensing)

resolution 11 bit + sign

·1 reference voltage output +10 V

·Low space requirements and low mounting depth.

The modules with voltage or current inputs also have the following features:

Module with voltage inputs:

·16 analog voltage input channels,

suitable for connecting active and passive resistors.

voltage rating,differential+/-10V

measured value resolution 11bit + sign

Module with current inputs:

.16 analog current input channels,

current rating,0...20 mA

measured value resolution 11bit + sign

Lieferumfang

Supplied with the module package is:

·An analog /O expansion module with voltage or current inputs.

2.2.

Technical data

Module data

Analog I/O expansion module

voltage or current inputs

Dimensions w x h x d [mm)

124 x 170 x 85.5 (modular dimension:B=113/118.5)

Weight

approx.550 g

Mounting

Mounting rail NS 35/7.5EN 50022

Working temperature

5°℃ to 50°℃ (no moisture condensation)

Operation and display

4 status LED's

EMC, class of protection, insulation testing, degree of protection

EMC (EN 50081-2/EN 50082-2)

To achieve the precision specified, the user

is required to implement shielding measures.

Emitted interference

EN 50081-2.industrial sector

Noise immunity

EN 50082-2.industrial sector

Class of protection

EN 61131-2

Insulation resistance

EN61131-2;500 VDC (test voltage)

Degree of protection

IP 20

Supply voltage, power consumption

Module electronics power supply

SELV DC +24V max. 0.3 A (EN 61131-2)

(supply voltage)

on AGND earth

Power consumption

at Ue= DC +24Vidling max.300 mA

Electrical isolation

yes, optodecoupled fromE bus;

no isolation between power supply and analog channels

Reverse voltage protection

yes

Connections

vertical front wiring push-on terminal strips

for screw. crimp or pinch connection

Reference voltage source

Reference voltage

DC +10V permanent short-circuit protection; lkmax 25 mA

Load current

max.5 mA

Precision

0.1%

Various characteristics

Data format in applicationprogram

Integer 16 bit

Monotonicity

yes

Cross talk between channels

-direct current

>70 dB

-50Hz

>70 dB

-60Hz

>70 dB

Non-linearity

<1LSB

Repeat accuracy at certain temperature

after 1 hour stabilising time

<1LSB

Analog inputs

Static characteristics::

voltage inputs

current inputs

Number

16

16

Type

voltage± 10V, differential

current,±20mA

Input impedance in signal range

10M Ohm

50 Ohm

Analog input error of measurement

- greatest error a 25*C

±0.1% of maximum scale value

±0.2% of maximum scale value

-temperature coefficient±0.01% of maximum scale value/°K

±0.02% of maximum scale value/*K

Greatest error over full

temperature range

±0.2 % of maximum scale value

±0.3 % of maximum scale value

LSB value

4.883 mV

9.766 μA

Max. permissible continuous overload

(exceeding this causes damage)

±30V

50 mA