K-WANG
BENTLY 3500/22M Transient Data Interface Module
BENTLY 3500/22M Transient Data Interface Module
INTRODUCTION
The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet.
The TDI resides in the slot adjacent to the power supplies of a 3500 rack. It interfaces with M series monitors (3500/40M, 3500/42M, etc.) to continuously collect steady state and transient dynamic (waveform) data and pass this data through an Ethernet link to the host software. Refer to the Compatibility section at the end of this document for more information.
Specifications
Consumption:10.5 Watts
Front Panel:10.5 Watts
Front Panel:USB-B
100Base-FX I/O:100Base-FX Fiber-Optic Ethernet
OK LED:Indicates when the 3500/22M is operating properly
TX/RX LED:Indicates when the 3500/22M is communicating with the other modules in the rack
TM LED:Indicates when the 3500 rack is in Trip Multiply mode
CONFIG OK LED:Indicates that the 3500 rack has a valid configuration
Maximum Current:<1 mAdc, Dry Contact to Common
Startup/Coastdown Data:
· Data collected at selected increments of speed and time
· Increasing and decreasing speed intervals are independently programmable
· Initiation of transient data collection based on detecting the machine speed within one of two programmable windows
· The number of transient events that can be collected is only limited by the available memory in the module
Alarm Data Collection
· Pre- and post-alarm data
· Static values collected at one second intervals for 10 minutes before the event and 1 minute after the event
· Static values collected at 100 ms intervals for 20 seconds before the event and 10 seconds after the event
· 2.5 minutes of waveform data collected at 10-second intervals before the alarm and 1 minute of waveform data collected at 10-second intervals after the alarm
Waveform Sampling
· Collection of waveforms for 48 channels.
· DC-coupled waveforms
· Simultaneous Synchronous and Asynchronous data sampled during all operational modes
· User-configurable Synchronous
APPLICATIONS
• Simulation
• Instrumentation
• Industrial control
• Process control and monitoring
• Factory automation
• Intelligent networked PLC controllers
• Automated test
• Data acquisition
· - ABB Advant-800xA,Advant OCS,Bailey Infi 90 and Net 90,H&B Freelance 2000,DSQC Robots,IGCT / IGBT
· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax
· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,
· - Bently Nevada 3300 System, 3500 System
· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)
· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC
· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider
User name | Member Level | Quantity | Specification | Purchase Date |
---|