K-WANG
GE IC200CPU005 Industrial Control Module
Processor Type:High-speed Microprocessor Memory Capacity:128 KB of RAM Operating Voltage:24V DC Communication Ports:2 x RS-485 Power Consumption:Max 1.5 W Dimensions:58mm x 58mm x 30mm Weight:Approx. 65g Temperature Range:-40"C to +70"C The GE IC200CPU005 is a robust, versatile module tailored for seamless integration into complex industrial automation systems. Its high-speed processor ensures rapid execution of control algorithms, enabling efficient management of production processes.
Featuring a generous amount of memory (128 KB RAM, 16 KB ROM), this PLC module can store a wide array of programs, including complex logic and sophisticated functions, without compromising performance. Equipped with 16 digital inputs and 16 digital outputs, the IC200CPU005 offers ample connectivity options, facilitating direct control over actuators, sensors, and other devices in your automation setup. With its wide operating voltage range and extended temperature tolerance (-20"C to +70"C), this module is designed to withstand harsh industrial environments, ensuring reliable operation in diverse settings.
The built-in RS-232 communication interface enables easy connectivity with other components in the network, supporting data exchange and remote diagnostics, thus optimizing system management and troubleshooting processes. The GE IC200CPU005 is a high-performance Programmable Logic Controller (PLC) module designed for industrial automation applications, offering exceptional reliability and efficiency in control systems.
Compatibility
ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page.
ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU.
ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0).
ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software.
ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network.
Module features include:
ƒ Support for all standard data rates (125K, 250K, 500K)
ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave
ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master
ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS
ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging
ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device
ƒ Support for configuration of the global scan rate
ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis
ƒ Support for PLC-application initiated explicit messaging via a COMMREQ
ƒ Master can be configured to operate as a slave simultaneously with master operation
ƒ Configurable fault behavior on loss of communication
ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable)
ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero)
ƒ Firmware update via service port on module
User name | Member Level | Quantity | Specification | Purchase Date |
---|