K-WANG

+086-15305925923
Service expert in industrial control field！
English 简体中文
Product
Article
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence 
Ship control system
Equipment control system
Power monitoring system
Home >> GE >> GE IC693ALG442 Analog Current/Voltage Combination Module
Current position：
   
Brand
GE IC693ALG442 Analog Current/Voltage Combination Module
❤ Add to collection

GE IC693ALG442 Analog Current/Voltage Combination Module

+86-15305925923
Mr.Wang
wang@kongjiangauto.com

Analog Current/Voltage Combination Module

4 Input/2 Output Channels - IC693ALG442

The Analog Current/Voltage Combination Input/Output module provides up to 4 differential

input current or voltage channels and 2 single-ended output channels with either current loop

outputs or voltage outputs. Each channel can be individually configured for the current or

voltage range, as applicable, required for your application. All module configuration is done

through software, except for a jumper required for selecting the current input mode. All ranges

can be configured using either the Logicmaster 90-30/20/Micro programming software

configurator function or the Series 90-30 Hand-Held Programmer.

￥12211.00
￥11111.00
Weight：1.100KG
Quantity：
(Inventory: 55)
Consultation
Product parameters
  • Telephone:+86-15305925923
  • contacts:Mr.Wang
  • Email:wang@kongjiangauto.com
Description

Analog Current/Voltage Combination Module

4 Input/2 Output Channels - IC693ALG442

The Analog Current/Voltage Combination Input/Output module provides up to 4 differential

input current or voltage channels and 2 single-ended output channels with either current loop

outputs or voltage outputs. Each channel can be individually configured for the current or

voltage range, as applicable, required for your application. All module configuration is done

through software, except for a jumper required for selecting the current input mode. All ranges

can be configured using either the Logicmaster 90-30/20/Micro programming software

configurator function or the Series 90-30 Hand-Held Programmer.

GE IC693ALG442 Analog Current/Voltage Combination Module

Analog Current/Voltage Combination Module
4 Input/2 Output Channels - IC693ALG442
The Analog Current/Voltage Combination Input/Output module provides up to 4 differential
input current or voltage channels and 2 single-ended output channels with either current loop
outputs or voltage outputs. Each channel can be individually configured for the current or
voltage range, as applicable, required for your application. All module configuration is done
through software, except for a jumper required for selecting the current input mode. All ranges
can be configured using either the Logicmaster 90-30/20/Micro programming software
configurator function or the Series 90-30 Hand-Held Programmer.
Note that in this module’s description, the module will be simply referred to as the Analog Combo
Module.
Each analog input is capable of providing five input ranges (two voltage and three current),
which are:
0 to +10 volts (unipolar) - default range for both input and output channels.
–10 to +10 volts (bipolar)
0 to 20 mA
4 to 20 mA
4 to 20 mA Enhanced
The default input range is voltage mode 0 to +10 volts (unipolar) with user data scaled so that
0V corresponds to a count of 0 and 10V corresponds to a count of 32767.
Each analog output is capable of providing four output ranges (two voltage and two current):
0 to +10 volts (unipolar) - default range for both input and output channels.
–10 to +10 volts (bipolar)
0 to 20 milliamps
4 to 20 milliamps
Each output channel is capable of converting 15 to 16 bits (depending on the range selected) of
binary (digital) data to an analog output for use as required by your application. User data in


the%AI and %AQ registers is in a 16-bit 2’s complement format. In current modes, an open-wire
fault is reported to the CPU for each channel. The module can go to a known last state when
system power is interrupted. As long as user power is applied to the module, each output will
maintain its last value, or reset to the low end of the scale (range), as determined by how you have
configured the module.
Each output channel can be configured to operate in ramp mode using ladder logic. In ramp
mode, changes in %AQ data cause the corresponding output channel to ramp to the new %AQ
value. The ramp output consists of steps taken each millisecond until the final value is reached.
High and low alarm limits can be set for all input channels and an open-wire fault (current
output modes) is reported to the CPU for each output channel. All six analog channels may be
updated on every scan, depending on the scan time.
Table 12-1. Specifications for IC693ALG442
Analog Output Specifications
Number of Output Channels 2, Single-Ended
Update Rate 4 milliseconds (approximate - both channels)
Analog Current Output
Output Current Ranges 0 to 20 mA
4 to 20 mA
Resolution
0 to 20 mA 0.625 µA (1 LSB = 0.625 µA)
4 to 20 mA 0.5 µA (1 LSB = 0.5 µA)
Absolute Accuracy1
All Current Modes ± 0.1% of full scale @25°C (77°F), typical
± 0.25% of full scale @25°C (77°F), (maximum)
± 0.5% of full scale over operating temperature range (maximum)
Maximum Compliance Voltage VUSER –3V (minimum) to VUSER (maximum)
User Load 0 to 850 Ω (minimum) at VUSER =20V,
maximum 1350Ω at VUSER =30V
Output Load Capacitance 2000 pF (maximum)
Output Load Inductance 1 H (maximum)
Analog Voltage Output
Output Ranges –10 to +10V (bipolar)
0 to +10V (unipolar)
Resolution
–10 to +10V 0.3125 mV (1 LSB = 0.3125 mV)
0 to +10V 0.3125 mV (1 LSB = 0.3125 mV)
Absolute Accuracy2
Both Voltage Modes ± 0.25% of full scale @25°C (77°F), typical
± 0.5% of full scale @25°C (77°F), (maximum)
± 1.0% of full scale over operating temperature range (maximum)
Output Loading 5 mA (2K ohms minimum resistance)
Output Load Capacitance 1 µF (maximum capacitance)
Analog Input Specifications
Number of Input Channels 4, differential
Update Rate 8 milliseconds (approximate for all 4 channels)
Analog Current
Input Ranges 0 to 20 mA
4 to 20 mA
4 to 20 mA Enhanced
(Table continued on next page)
(Continued from previous page)
Resolution
0 to 20 mA 5 µA (1 LSB = 5 µA)
4 to 20 mA 5 µA (1 LSB = 5 µA)
4 to 20 mA Enhanced 5 µA (1 LSB = 5 µA)
Absolute Accuracy3
All Current Modes ± 0.25% of full scale @25°C (77°F)
± 0.5% of full scale over specified operating temperature range
Linearity <1 LSB
Common Mode Voltage 200V (maximum)
Common Mode Rejection >70 db at DC; >70 db at 60 Hz
Cross Channel Rejection >80 db from DC to 1 kHz
Input Impedance 250 Ω
Input Filter Response 29 Hz
Analog Voltage Input
Input Ranges 0 to +10V (unipolar)
–10 to +10V (bipolar)
Resolution
0 to +10V 2.5 mV (1 LSB = 2.5 mV)
–10 to +10V 5 mV (1 LSB = 5 mV)
Absolute Accuracy3
Both Voltage Ranges ± 0.25% of full scale @25°C (77°F)
± 0.5% of full scale over specified operating temperature range
Linearity <1 LSB
Common Mode Voltage 200V (maximum)
Common Mode Rejection >70 db at DC; >70 db at 60 Hz
Cross Channel Rejection >80 db from DC to 1 kHz
Input Impedance 800K Ω (typical)
Input Filter Response 29 Hz
Power Requirements
External Supply Voltage Range 20 to 30 VDC (24 VDC typical)
Power Supply Rejection Ratio
(PSRR)4
Current
Voltage
5 µA/V (typical), 10µA/V (maximum)
25 mV/V (typical), 50mV/V (maximum)
Voltage Ripple 10%
Current Consumption
From Internal +5V Supply 95 mA
From External User Supply 129 mA
1In the presence of severe RF interference (IEC 801-3, 10V/m), accuracy may be degraded to ±1% FS.
2In the presence of severe RF interference (IEC 801-3, 10V/m), accuracy may be degraded to ±4% FS.
3In the presence of severe RF interference (IEC 801-3, 10V/m), accuracy may be degraded to ±2% FS.
4PSSR is measured by varying VUSER from 24V to 30V.
  • Beckhoff CP39xx series industrial touch control panel
  • Beckhoff CX8110 Embedded Industrial PC
  • Beckhoff CX50x0 series DIN rail embedded industrial PC
  • Beckhoff CP62xx series embedded panel PC
  • BECKHOFF C6030 Compact Industrial PC
  • UniOP ePAD32B/ePAD33B/ePAD33BT Industrial HMI
  • UniOP ePAD05&ePAD06 Industrial HMI
  • UniOP ePAD03/ePAD04 entry-level HMI
  • UniOP CP01R-04 Compact Industrial HMI
  • UniOP BKDR-16 Industrial Human Machine Interface
  • Beckwith M-3425A Generator Integrated Protection Relay
  • Basler DECS-200 Digital Excitation Control System
  • Basler DECS-250 Digital Excitation Control System Manual
  • HA-800 series AC servo drive
  • JUMO dTRANS p35 Pressure Sensor Operation Manual with IO Link Interface
  • KEBA XE 020 RFID Module
  • Honeywell SmartLine series transmitters
  • Eaton CROUSE-HINDS MTL MA30 RF and Surge Protector Operation Manual
  • Beckhoff EL31xx Series 16 Bit EtherCAT Analog Input Terminal Manual
  • BECKHOFF AX5000 series EtherCAT servo drive
  • BECKHOFF EL30xx Series 12 Bit Analog Input Terminal Manual
  • Beckhoff EL70x7 series stepper motor EtherCAT terminal manual
  • BECKHOFF CX52x0 Series Embedded Industrial PC Hardware Manual
  • BECKHOFF CX9000/CX9010 series embedded controllers
  • BECKHOFF AM8000/AM8500 Series Synchronous Servo Motor Operation Manual
  • BECKHOFF EL9xxx series EtherCAT system terminal
  • BECKHOFF EK110x/EK15xx series EtherCAT bus coupler
  • BECKHOFF CX51x0 Series Embedded PC Hardware Manual
  • BECKHOFF CX2100-0014 Embedded Power Unit User Manual
  • BECKHOFF CX1000 Series Modular Embedded Industrial PC Hardware Manual
  • BECKHOFF CP69xx series embedded industrial control panel usage instructions
  • Beckhoff C6030-0080 ultra compact industrial PC
  • IFM O3D series time-of-flight 3D industrial sensor usage instructions
  • Allen Bradley Guardmaster 440R series safety relay
  • OMRON SYSMAC CS1 Rack mounted Large and Medium sized PLC Selection
  • GE Multilin EPM9900P high-precision power quality analyzer
  • Automotive LC-4 series brushless DC driver
  • Doric NC500 Neuroscience Acquisition Host
  • Honeywell X-DCS2000/EN DIGITAL INTEGRATED SYSTEM MANAGER SYSTEM MANAGER
  • Kollmorgen SERVOSTAR600 (601~620) servo drive
  • ABB Totalflow X series differential pressure flow computer
  • ABB ACS6000 medium voltage frequency converter
  • OMRON NX502 model Sysmac platform machine controller hardware usage instructions
  • OMRON NX102 model hardware usage instructions
  • OMRON C200HX/HG/HE series rack mounted medium-sized PLC operating instructions
  • Azbil SDC35/SDC36 single circuit temperature controller
  • MITSUBISHI ELECTRIC HIGH PERFORMANCE, COST EFFICIENT GT25 SERIES
  • Eurotherm Mini8 Modular Temperature Control Controller
  • KEYENCE GC-1000/GC-1000R Safety Controller
  • SICK RLY3-EMSS300 safety relay
  • Siemens SIRIUS 3SK2 safety relay
  • Nordson DAGE4000 Bond Tensile Tester
  • Operation and Maintenance Instructions for HMS Anybus Communicator Communication Gateway
  • Allen Bradley 800T/800H 30mm button and indicator light
  • Schneider Modicon M340 Medium PAC/PLC Selection and Specifications
  • Kepco BOP series four quadrant bipolar power supply
  • Siemens SIPROTEC 5 Series Relay Protection and Automation Equipment
  • Banner XS/SC26&SC10-2 Safety Controller
  • Allen Bradley MicroLogix 1500 Programmable Controller
  • EOCR-PMZ (panel embedded) and EOCR-PFZ (embedded) motor comprehensive protector
  • Microchip PIC12F/PIC16F182X series 8-bit low pin count microcontroller
  • FANUC α iS/α iF/β iS series servo parameters
  • Mitsubishi Electric GOT2000 Series GT23 Touchscreen (HMI) General Instructions
  • MITSUBISHI ELECTRIC GT27 series high-end multi touch advanced HMI (touch screen)
  • Siemens SIMATIC ET 200M Distributed I/O System
  • Lenze 8200 Vector Series Vector Inverter
  • Siemens SIMOVERT MASTERDRIVES Vector Control (VC) Inverter Operating Instructions
  • FANUC I/O Unit MODEL A Connection and Maintenance
  • Allen Bradley Classic 1785 PLC-5 Series Programmable Logic Controller
  • M&C SP2006-H/DIL series heated dilution gas sampling probe
  • Mitsubishi DIASYS Nettation MODBUS TCP Driver Instructions
  • OMRON SYSMAC C-series/CVM1/CV series analog I/O units
  • LTi DRiVES ServoOne single axis servo drive
  • OMRON C-series/CVM1/CV series analog I/O units
  • Siemens SINUMERIK 840C+SIMODRIVE 611-D Installation Guide
  • ABB ACS550 frequency converter
  • OMRON SYSMAC NX series NX1P2 CPU unit
  • Fuji FRENIC Mini Inverter
  • Braided Flexible Connections
  • Mecc Alte MC200 Controller
  • Schneider Square D 9036/9037/9038 Electromechanical Liquid Level Controller
  • Pilz PSS 4000 Automation System
  • Schneider TeSys Giga GV5/GV6 motor protection circuit breaker
  • Eaton Freedom NEMA Contactor and Starter Specification
  • OMRON D4SL-N Safety Door Switch (Including Locking) Specification
  • NI CompactRIO Embedded System
  • I/O module of Emerson Ovation distributed control system
  • MITSUBISHI MELSEC A series PLC（MELSEC-A）
  • Specification for Automation Direct DL06 Series Micro PLC (D0-06DD1)
  • IFM CR2530 SmartController Installation Manual
  • OMRON FH/FHV series visual sensor controller
  • PILZ PDP67 F 4 code operation instructions
  • Panasonic FP-X series PLC
  • OMRON CK3W-AX Axis Interface Unit Specification
  • EPSON RC90/RC90-B Robot Controller
  • Nthytronic Group iRTUe Modular I/O Expansion Unit
  • Schneider Altivar Machine ATV320 frequency converter
  • Eaton Cutler Hammer Pull SPB Automatic Transfer Switch (ATS) Operation and Maintenance
  • GFS Corp EVO-SP 2600 Diesel Generator Set Natural Gas Conversion System Specification
  • OMRON SYSMAC CJ Series CJ2 CPU Unit Hardware
  • Lenze ECS servo frequency converter
  • GE EX2100e excitation control system 35A/120A regulator
  • OMRON G3PW Power Controllers
  • MITSUBISHI FX3GE MELSEC Compact PLC
  • BECKHOFF EP23xx series IP67 protection level EtherCAT Box digital input/output module
  • MITSUBISHI MDS-A/B Series CNC AC Servo/Spindle System
  • TOYO's full range of valve products
  • SIEMENS SIMODRIVE 611 Universal/Universal E Full Series Digital Drive Control Board
  • SIEMENS SINUMERIK 840C SIMODRIVE 611-D Installation Guide
  • FANUC 0i Model F Universal CNC Control System
  • Schneider Modicon TM3 Expansion I/O modules for Modicon M221, M241, M251 and M262 controllers
  • R&S®EPL1000 EMI TEST RECEIVER
  • Baum ü llerb maXX series modular servo drive and automation platform
  • Huichuan AM600 motion controller
  • Allen Bradley Ultra3000 Servo System Design Guide
  • NEC NL8060BC26-17 LCD Module
  • ABB Jokab Pluto Safety PLC
  • OMRON NE1A Series Secure Network Controller Operation Manual
  • Allen Bradley 2711P series PanelView Plus human-machine interface terminal
  • NI cFP-2200/2210/2220 Compact FieldPoint Intelligent Real time Controller
  • Installation Instructions for KEYENCE XG-8000 Series Line Scan Camera Version Vision System
  • Omron G9SX series flexible safety unit
  • OMRON SYSMAC CPM1A series programmable controller
  • ABB ACH550 frequency converter installation, operation and maintenance instructions
  • IDEC MicroSmart FC6A PLC CPU Module
  • Gefran GILOGIK II Distributed I/O and Control System
  • GE VersaMax Nano/Micro PLC
  • Nastyaer GIV50-11 Position Limit Switch