K-WANG
GE IC694MDL940C High-Performance Relay Output Module, for Industrial Automation
Product Type:Relay Output Module Number of Channels:Eight (8) Form Factor:Individually isolated Number of Outputs:16 Connection Type:Relay Operating Voltage:DC 24V Load Rating:1A per channel Temperature Range:-20"C to +60"C Dimension (WxDxH):11 x 6 x 6.7 cm Weight:0.14 kg Engineered for Durability Constructed with aerospace-grade materials, the GE IC694MDL940C Relay Output Module ensures longevity in even the most harsh industrial conditions.
Enhanced Reliability The SPST relay design guarantees consistent performance, making it ideal for critical control applications where failure is not an option. Efficient Power Management With a current rating of 2A at 24VDC, this module efficiently handles power demands, reducing energy consumption and improving system performance. Wide Operating Temperature Range From -40"C to +70"C, this module operates reliably across a broad spectrum of environmental conditions, ensuring stable performance in various industrial settings. Compact and Space-Saving Design Measuring 4.8in x 1.2in x 0.9in and weighing only 0.2lb, the GE IC694MDL940C is designed to fit seamlessly into tight spaces without compromising on functionality. The GE IC694MDL940C Relay Output Module is a high-performance solution designed for industrial control systems, offering precise and reliable signal transmission for various applications.
Benefits
Single slot CPU
Provides 1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program) Supports floating point calculations
Up to 12K discrete inputs and outputs (any mix - simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs
0.4 microseconds per boolean function
64 MHz, 80486DX2 microprocessor
Supports IC660/IC661 I/O (and IC697 I/O in simplex mode only)
Programmed by MS-DOS
, or Windows
software products running on Windows
95 or Windows NT
over Ethernet TCP/IP or through the SNP port.
Configurable data and program memory
Battery-backed calendar clock
Three position operation mode switch
Password controlled access
Remote programmer keyswitch memory protection
Four status LEDs
Software configuration (No DIP switches or jumpers)
Reference information inside front door
In-system upgradable firmware
OTHER INFORMATION
• Celeron™ socket 370-based single-board computer (SBC) with operating system support for Windows NT®/Windows® 2000, Linux, VxWorks, QNX, and Solaris
• Special features for embedded applications
— Up to 512 Mbyte IDE CompactFlash (optional)
— Three programmable 16-bit timers
— 32 Kbyte of battery-backed SRAM
— Remote Ethernet booting supported
— Software-selectable watchdog timer with reset
— Supports VMEbus P2 connection to HD/floppy drive
— PMC expansion site with VMEbus P2 I/O
— PC•MIP expansion site supported
— VME64 modes supported: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32
— VMEbus interrupt handler, interrupter, and system controller
— Includes byte-swapping hardware for little-endian and big-endian data interfacing (patent no. 6,032,212)
— Enhanced bus error handling
— Passive heat sink design (no moving parts)
• Standard features include
— Celeron socket 370 processor
— Up to 256 Mbyte SDRAM using one 144-pin SODIMM
— 64-bit Intel® AGP SVGA controller with 2 Mbyte SGRAM
— On-board Fast Ethernet controller supporting 10BaseT and 100BaseTX interfaces
— On-board Ultra DMA/33 hard drive and floppy drive controllers with VMEbus P2 I/O
— Two high-performance 16550-compatible serial ports
— PS/2-style keyboard and mouse port on front panel
— Real-time clock and miniature speaker included
User name | Member Level | Quantity | Specification | Purchase Date |
---|