K-WANG
+086-15305925923
Service expert in industrial control field！
Product
Article
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence
Ship control system
Equipment control system
Power monitoring system
Brand
Product parameters
- Telephone:+86-15305925923
- contacts:Mr.Wang
- Email:wang@kongjiangauto.com
Description
Product DescriptionThe Analog Input Module with 8 isolated inputs is an intelligent module that accepts input signals from up to 8 analog devices and provides input data with 16 bits of resolution.
GE IC200ALG240 Analog Input Module
In current mode, a separate power supply may be required for isolated
inputs. Module features include:
Eight isolated 4-20mA current input channels
Sixteen-bit converter resolution
Open wire detection
High-accuracy factory calibration
The following additional features are software-configurable:
Per-channel selection of 4-20mA current or +/–10V voltage inputs
Selectable input filter to reject normal mode AC pickup noise
Selection of default/hold last state operation
Per-channel selection of default values
Per-channel selection of under-range and over-range diagnostics
levels
Per-channel selection of alarm levels
Per-channel scaling
Field re-calibration on command
Host Interface
The module provides 8 words of analog input data
Diagnostics
The module reports over/under range, open wire, loss of field power
supply, non-volatile memory storage fault, and high/low alarm
diagnostics.
LED Indicators
The green FLD PWR LED indicates the presence of both backplane
power and field power for the analog field-side circuits. The absence of
either backplane or field power turns off the FLD PWR LED.
The OK LED indicates module status:
On green indicates normal operation
Flashing green indicates boot mode or update
Flashing amber indicates self-diagnostic error
Module Characteristics
Channels 8 inputs
Module ID FFFF9802
Isolation:
User input to logic (optical)
and to frame ground,
Group to Group
Channel to channel
250VAC continuous; 1500VAC for 1 minute
Not applicable
250VAC continuous; 1500VAC for 1 minute
LED indicators FLD PWR LED indicates the presence of both logic
power and user power. OK LED indicates module
status.
Backplane current
consumption
5V output: 15mA maximum.
3.3V output: 120mA maximum
External power supply:
Range
Current consumption
+19.5 to +30VDC including ripple
100mA maximum plus load currents
Thermal derating None
Diagnostics High/Low Limit, Over/Underrange, Open Wire, Loss
of Field Power Supply, Non-volatile memory fault
Input Characteristics
Input operating range Current mode: +1 to 20mA
Voltage mode: +/-10VDC
Accuracy at 25 degrees C +/- 0.1% maximum of full scale
Temperature coefficient Current mode: 45ppm/°C typical, 90 ppm/°C
maximum
Voltage mode: 30ppm/°C typical, 60 ppm/°C
maximum
Analog Resolution (1 LSB) Current mode: 381 nA nominal
Voltage mode: 381 µV nominal
Channel data update rate Approximately 20 mS max. @ 50 Hz filter frequency
Approximately 16.7 mS max. @ 60 Hz filter frequency
Channel-to-channel
crosstalk rejection
70dB minimum
Input default Hold Last State (default)
0 (configurable)
Field input DC resistance Current mode:150 Ohms
Voltage mode:760 KOhms
Field input filter Type: Digital w/programmable notches at 50 or 60 Hz
3 dB Corner Frequency: 10Hz ± 25%
Normal mode (power line
frequency) rejection
35 dB minimum
Field Input Ranges Current mode: Approximately 0 mA to +25 mA
Voltage mode: Approximately –12.5 V to +12.5 V
Maximum field input
(without damage)
Current mode: ± 35 mA continuous
Voltage mode: ± 17.5 V continuous
Preinstallation Check
Carefully inspect all shipping containers for damage. If any equipment is
damaged, notify the delivery service immediately. Save the damaged
shipping container for inspection by the delivery service. After unpacking the
equipment, record all serial numbers. Save the shipping containers and
packing material in case it is necessary to transport or ship any part of the
system.
Module Characteristics
Channels 8 inputs
Module ID FFFF9802
Isolation:
User input to logic (optical)
and to frame ground,
Group to Group
Channel to channel
250VAC continuous; 1500VAC for 1 minute
Not applicable
250VAC continuous; 1500VAC for 1 minute
LED indicators FLD PWR LED indicates the presence of both logic
power and user power. OK LED indicates module
status.
Backplane current
consumption
5V output: 15mA maximum.
3.3V output: 120mA maximum
External power supply:
Range
Current consumption
+19.5 to +30VDC including ripple
100mA maximum plus load currents
Thermal derating None
Diagnostics High/Low Limit, Over/Underrange, Open Wire, Loss
of Field Power Supply, Non-volatile memory fault
Input Characteristics
Input operating range Current mode: +1 to 20mA
Voltage mode: +/-10VDC
Accuracy at 25 degrees C +/- 0.1% maximum of full scale
Temperature coefficient Current mode: 45ppm/°C typical, 90 ppm/°C
maximum
Voltage mode: 30ppm/°C typical, 60 ppm/°C
maximum
Analog Resolution (1 LSB) Current mode: 381 nA nominal
Voltage mode: 381 µV nominal
Channel data update rate Approximately 20 mS max. @ 50 Hz filter frequency
Approximately 16.7 mS max. @ 60 Hz filter frequency
Channel-to-channel
crosstalk rejection
70dB minimum
Input default Hold Last State (default)
0 (configurable)
Field input DC resistance Current mode:150 Ohms
Voltage mode:760 KOhms
Field input filter Type: Digital w/programmable notches at 50 or 60 Hz
3 dB Corner Frequency: 10Hz ± 25%
Normal mode (power line
frequency) rejection
35 dB minimum
Field Input Ranges Current mode: Approximately 0 mA to +25 mA
Voltage mode: Approximately –12.5 V to +12.5 V
Maximum field input
(without damage)
Current mode: ± 35 mA continuous
Voltage mode: ± 17.5 V continuous
Preinstallation Check
Carefully inspect all shipping containers for damage. If any equipment is
damaged, notify the delivery service immediately. Save the damaged
shipping container for inspection by the delivery service. After unpacking the
equipment, record all serial numbers. Save the shipping containers and
packing material in case it is necessary to transport or ship any part of the
system.
Purchase history
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
Total 0 Record
Customer Reviews
Satisfaction ：
5 Stars
No evaluation information
- other
- LTI Drives
- ADLINK
- Beckhoff
- Other Brands
- AMAT
- Iba
- PEPPERL+FUCHS
- Aerotech
- WATLOW
- MAN
- ADVANCED
- Abaco
- YOKOGAWA
- KOLLMORGEN
- MEGGITT
- kong-sberg
- METSO
- Motorola
- NI
- OEMAX
- RELIANCE
- scanlab
- schneider
- uniop
- Vibro-Meter
- Honeywell
- Rolls-Royce
- MOOG
- GE
- B&R
- Woodward
- Yaskawa
- xYCOM
- Siemens
- Emerson
- HIMA
- Bently
- ZYGO
- FOXBORO
- OMACO
- PROSOFT
- ENTERASYS
- TRICONEX
- Parker
- Lenze
- KEBA
- Alstom
- CTI
- ABB
- A-B
145
-
ADLINK PXIe-3988 3U PXI Express Zero Slot Embedded Controller -
ADLINK PXIe-3987/3977/3937 PXI Express Zero Slot Embedded Controller -
ADLINK PXIe-3987 PXI Express Embedded Controller -
ADLINK PXIe-3988/3987/3977/3937-TL PXI Express Embedded System Controller -
ADLINK PXI-2020/PXI-2022 Synchronous Sampling Multi functional PXI Data Acquisition Card -
ADLINK DAQ-20XX/PXI-20XX series 4-channel synchronous multifunctional data acquisition card -
ADLINK PXES-2788 series high-performance and high-power PXIe chassis -
ADLINK PXES-2785 18 Slot PXI Express Chassis -
ADLINK PXES-2780 18 Slot PXI Express Chassis -
ADLINK PXES-2596 Gen3 9-slot PXI Express chassis -
ADLINK PXES-2590 9-slot PXI Express chassis -
ADLINK PXES-2314T Thunderbolt 3 Compact 4-slot PXI Express Chassis -
ADLINK PXES-2301 6-slot PXI Express chassis -
ADLINK PCIe U300 series USB3 Vision image acquisition host card -
ADLINK PCIe PXIe 8565 PCIe to PXIe Remote Expansion Kit -
ADLINK PCIe GIE74V 4-channel GigE Vision acquisition card -
ADLINK PCIe - GIE7x Series PCIe x4 Interface GigE Vision PoE+Gigabit Network Image Capture Card -
ADLINK PCIe CPL64V PCIe Gen3 x4 specification Camera Link image acquisition card -
ADLINK PCIe CPL64 PCIe x4 Interface Camera Link Image Capture Card -
ADLINK PCIe 8560+PXI 8565 PCI Express to PXI Remote Bus Expansion Kit -
ADLINK PCIe 8332/PCIe 8334/PCIe 8338 EtherCAT Master Station Motion Controller -
ADLINK PCIe 7432 bus industrial isolated digital I/O board -
ADLINK PCIe 7256 Industrial Digital I/O Board -
ADLINK PCIe‑833x（PCIe‑8332 / 8334 / 8338）PCIe EtherCAT Master Motion Controller -
ADLINK PCIe -10GPoE Dual Channel PCIe Gen3 PoE+10GigE Vision Image Acquisition Card -
ADLINK PCI-8254/PCI-8258 High end 4/8-axis Advanced Motion Control Card -
ADLINK PCI-8158/PCI-8154 Modular Architecture Advanced Pulse Motion Control Card -
ADLINK PCI-8134A entry-level 4-axis pulse servo/stepper motion control card -
ADLINK PCI-725X Series Relay Output and Isolation Digital Input Board -
ADLINK PCI-6308 series isolated analog output board -
ADLINK PanKonix ® Series industrial HMI all-in-one machine -
ADLINK NuDAM-6100 series DIN rail installation, RS-485 bus distributed IO module -
ADLINK NuDAM-6000 complete distributed RS-485 acquisition and control system -
ADLINK NEON-2000-ONO series AI intelligent camera -
ADLINK NuDAM-65xx Communication Module -
ADLINK NuDAM-60xx Series Digital I/O Modules -
ADLINK MXE-5300 series fanless embedded computer -
ADLINK MXE-310 Series Rugged and Compact edge computing Device -
ADLINK MXE ‑ 230 series ultra compact fanless Alder ‑ Lake ‑ N platform industrial edge computer -
ADLINK MXE-210 series fanless X86 embedded industrial computer -
ADLINK MXC-3300/MXC-3340 Fanless Scalable Embedded Industrial Computer -
ADLINK MXA-312M Ultra Compact Edge AI Computer User Manual -
ADLINK MXA-200 Industrial IoT Energy Gateway -
ADLINK MVP-6200 series fanless expandable industrial computer -
ADLINK MVP-6100 series expandable fanless industrial computer -
ADLINK MVP-5200 series fanless industrial computer -
ADLINK MVP-5100 series fanless industrial computer -
ADLINK MVP-3100 series fanless embedded machine -
ADLINK MNET-J3/S23/MIA/DA2/SAN single axis Motionnet distributed motion module -
ADLINK MNET-4XMO/MNET-4XMO-C distributed 4-axis motion control module -
ADLINK MCM-216/MCM-218 Independent Ethernet Distributed Device Status Monitoring DAQ -
ADLINK LPCIe-8124-C 4-channel high-speed trigger encoder acquisition card -
ADLINK IM/OM series industrial touch display -
ADLINK GW-01 is compatible with PLC industrial IoT gateway -
EURESYS Grablink Full Series Image Acquisition Cards -
ADLINK Express HL COM Express Type6 Core Module -
ADLINK EOS-2000 4-channel analog embedded visual controller -
ADLINK EOS-1200 4-channel Gigabit PoE Embedded Vision System -
ADLINK ECS-8582-4S ExpressCard to PCI Expansion System Manual -
ADLINK DIN-814P-A4 4-axis dedicated motion terminal board -
ADLINK DIN-814M-J3A 4-axis dedicated motion adapter terminal board -
ADLINK DIN-814-GP Reference Guide -
ADLINK DIN-812M Terminal Block Installation Manual -
ADLINK DIN-814Y Terminal Board -
ADLINK DAQ/DAQE/PXI-250x series multifunctional analog output acquisition card -
ADLINK DAQ/DAQE/PXI-220x series multifunctional acquisition card -
ADLINK cPCI-9116 3U CompactPCI 64 channel 16 bit 250KS/s analog acquisition card -
ADLINK cPCI/PCI-8554+R multifunctional counting/timing card -
ADLINK 743X series isolated digital IO board -
ADLINK cPCI-3534/cPCI-3544/cPCI-3538 series serial port module -
ADLINK cPCI-3534/3544/3538 series CompactPCI serial port module -
Euresys Coaxlink Full Series CoaXpress Image Capture Cards -
ADLINK AMP-304C High end 4-axis Pulse Motion Control Card -
ADLINK AMP-104C Four Axis Pulse Motion Control Card -
ADLINK NEON-1020/NEON-1040 Smart Camera -
ADLINK USB-7230/USB-7250 Isolated Digital I/O Module -
ADLINK SP-15W03 15.6-inch intelligent all-in-one machine -
ADLINK DIN-825-4P0 Terminal Board -
ADLINK USB/LPCI/LPCIe-3488A GPIB interface card -
ETEL TMB+series standard torque motor -
ADLINK Angelo RTV series multi-channel real-time video capture card -
ADLINK PCIe FIW Series 1394b Image Acquisition Card -
ADLINK 6208/6216-GL series analog output card -
ADLINK PCI/cPCI -/LPCI -/LPCIe-723X series 32 channel isolated digital I/O board -
ADLINK PCI-9118 series multifunctional DAQ card -
ADLINK PCI-9114 (A) Multi functional PCI Data Acquisition Card -
ADLINK PCI-7440 series (PCI-7442/7443/7444) high-density isolated digital I/O cards -
ADLINK PCI/LPCI/LPCIe/cPCI-7250 series relay isolation digital IO board -
Advantech PCI-1610 Series 4-port RS232 PCI Serial Port Card -
ADLINK NEON-1000-MDX series AI intelligent camera -
ADLINK MXE-1300 series industrial fanless industrial control computer -
ADLINK MXE-200/200i Fanless Embedded Computer -
ADLINK LPCIe/LPCI/USB-3488A GPIB interface card -
ETEL Linear Motors Product Manual -
ETEL IL+Ironless/LM Iron Core Linear Motor -
ETEL DSC Series (DSC2P/DSC2V/DSCDP/DSCDL/DSCDM) Operation and Software Manual -
ETEL DSCDL Dual Axis Digital Direct Drive Controller Hardware Manual -
ETEL DSB2-P Digital Servo Amplifier -
ETEL DSC Series Digital Position Controller Operating Software Manual -
DFI HD636-H81CS ATX Industrial Motherboard -
ADLINK DAQ/DAQE/PXI-20xx series multifunctional synchronous acquisition card -
ADLINK cPCI-6530 series 6U CompactPCI single board computer -
ADLINK cPCI-3610 Series 3U CompactPCI Single Board Computer -
ADLINK AMP-204C/AMP-208C Motion Control Card -
ADLINK AmITX-ALN-N97 Mini ITX Industrial Motherboard -
ADLINK NuPRO-850 Full length ePCI-X Industrial Control Board -
ADLINK MI-965 Mini ITX Industrial Motherboard -
ADLINK M-302 ATX Industrial Motherboard -
ADLINK PXI-3920/PXI-3910 3U PXI System Controller -
ADLINK PCI-8132 Two Axis Servo/Stepper Motion Control Card -
ADLINK cPCI-6760D 6U CompactPCI Single Board Computer -
ADLINK ACL-7122 144 bit digital I/O board -
ADLINK NuPRO-775 Half length Socket370 Industrial Single Board Computer -
ETEL Accuret MODULAR series servo controller -
ADLINK PCI-9112/cPCI-9112 multifunctional acquisition card -
ADLINK PCI-8102 Two Axis Pulse Motion Control Card -
ADLINK PCI-9812/PCI-9810 synchronous 4-channel high-speed acquisition card -
ADLINK PCI-7200/cPCI-7200 high-speed digital I/O board -
ADLINK MXE-1000 series fanless embedded machine -
ADLINK IMB-T10 Mini ITX Industrial Motherboard -
ADLINK HSL Distributed High Speed I/O System -
ADLINK PXI/DAQ/DAQe-2500 series multifunctional analog output DAQ card -
ADLINK PXI/DAQ/DAQe-2200 series multifunctional data acquisition card -
ADLINK ETX-AT ETX Core Computer Module -
ADLINK ACL-7225 ISA 16 channel relay output+16 channel isolated digital input card -
ADLINK DAQ-2000 series synchronous acquisition card -
ADLINK NuPRO-E330 PICMG 1.3 full-length industrial motherboard (SHB) -
ADLINK ACL-8112 series multifunctional ISA acquisition card
K-JIANG
Add: Jimei North Road, Jimei District, Xiamen, Fujian, China
Tell：+86-15305925923