GE DS3820LIMA1 Industrial Circuit Board, Optimized for GE Systems

GE DS3820LIMA1  Industrial Circuit Board, Optimized for GE Systems

Brand:General Electric Model:DS3820LIMA1 Sub-Model:CIRCUIT BOARD Application Type:Industrial Control Series:Mark IV DS3800 Made In:USA Material:High-Quality Copper Alloy Dimensions:170mm x 100mm x 20mm Weight:0.5kg Power Rating:Up to 500W Operating Temperature Range:-20"C to 85"C Communication Interfaces:RS-485, CAN Bus Certifications:CE, UL, CSA Safety Standards:IEC 61010-1 Warranty:2-Year Manufacturer Warranty The GE DS3820LIMA1 Circuit Board is a high-performance component designed for seamless integration into industrial control systems. It features a robust design with a distinct GE emblem and serial number for traceability and quality assurance. 

 Engineered for durability and reliability, this circuit board withstands harsh industrial conditions, ensuring uninterrupted operations in manufacturing lines and other critical applications. Equipped with advanced diagnostics and monitoring capabilities, the DS3820LIMA1 facilitates proactive maintenance, reducing downtime and maximizing efficiency. Compliant with international safety standards, the board incorporates innovative safety features to protect operators and equipment, ensuring a safe working environment. 

 Supporting various communication protocols, the DS3820LIMA1 seamlessly integrates with existing systems, enhancing compatibility and streamlining the setup process. For optimal performance and longevity, it is recommended to follow the original manufacturer  guidelines for installation and maintenance. Technical support is readily available for any inquiries or issues. Engineered for precision control in industrial environments, this General Electric circuit board delivers reliable performance in critical applications. 

Compatibility 

ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page. 

ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU. 

ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0). 

ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software. 

ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network. 

Module features include: 

ƒ Support for all standard data rates (125K, 250K, 500K) 

ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave 

ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master 

ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS 

ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging 

ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device 

ƒ Support for configuration of the global scan rate 

ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis 

ƒ Support for PLC-application initiated explicit messaging via a COMMREQ 

ƒ Master can be configured to operate as a slave simultaneously with master operation 

ƒ Configurable fault behavior on loss of communication 

ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable) 

ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero) 

ƒ Firmware update via service port on module