K-WANG
GE SR750-P5-G5-D5-HI-A1-R Feeder Management Relay Industrial Control Precision & Efficiency
Operating Voltage:240 V AC Current Rating:Up to 50 A Protection Types:Time overcurrent, frequency, and phase loss Communications Protocol:Modbus RTU Mounting Configuration:Panel mountable Relay Output:8 independent contact sets Environmental Rating:IP20 Weight:0.7 kg Dimensions:100 x 150 x 90 mm Introducing the GE SR750-P5-G5-D5-HI-A1-R, a sophisticated feeder management relay that merges advanced technology with reliability, specifically engineered for industrial applications. Its cutting-edge design ensures seamless integration into complex control systems, enhancing operational efficiency.
Equipped with comprehensive protection modes including time-overcurrent, short-circuit, and ground-fault detection, the relay safeguards against potential disruptions, safeguarding your system from unexpected failures. Its robust communication protocol ensures reliable data transmission, facilitating seamless coordination within your network. Engineered for durability, the relay operates within a wide temperature range (-40"C to +70"C), making it suitable for various industrial environments. The high insulation resistance ensures reliable operation even in challenging conditions, guaranteeing uninterrupted service.
With its compact size (100mm x 100mm x 35mm), the GE SR750-P5-G5-D5-HI-A1-R offers space-efficient installation options. It boasts two sets of normally open relay contacts, providing flexible control over your system circuits. This versatile feature allows for customization based on specific application requirements. Backed by GE commitment to quality, the SR750-P5-G5-D5-HI-A1-R is designed to meet the stringent demands of industrial settings. It combines precision engineering with user-friendly operation, ensuring that your control systems run smoothly, efficiently, and safely. The GE SR750-P5-G5-D5-HI-A1-R is a high-performance feeder management relay designed for industrial control systems. It offers precise control and enhanced protection for distribution feeders, ensuring optimal system performance and reliability.
Compatibility
ƒ Compatible with any Series 90-30 CPU except IC693CPU321 and IC693CPU340. Configuration size is limited for CPU311/313/331, as described on the next page.
ƒ Requires release 8.0 CPU firmware. The latest Release 10 is recommended, if available for the particular CPU.
ƒ Requires CIMPLICITY Machine Edition Logic Developer PLC version 3.0 plus the appropriate service pack or special (or a version later than 3.0).
ƒ Not compatible with the VersaPro™, Control, or Logicmaster™ programming software.
ƒ The Series 90-30 Hand-Held Programmer (IC693PRG300) cannot be used to configure this module. New Features The Series 90-30 DeviceNet Master Module allows a Series 90-30 PLC to send and receive I/O data from a DeviceNet network.
Module features include:
ƒ Support for all standard data rates (125K, 250K, 500K)
ƒ Support for 255 bytes input data transfer and 255 bytes output data transfer per slave
ƒ Support for 3972 bytes of input data transfer and 3972 bytes of output data transfer per master
ƒ Support for two I/O connections per Slave - Typically one connection is used for Polled and the other is used for Strobe, Cyclic, or COS
ƒ Support for Poll, Strobe, Cyclic and COS I/O Connections, Fragmented I/O and Explicit Messaging
ƒ Support for Unconnected Message Manager (UCMM) with 1 proxy connection per slave device
ƒ Support for configuration of the global scan rate
ƒ Support for configuration of update rates for Poll and COS/Cyclic on a connection basis
ƒ Support for PLC-application initiated explicit messaging via a COMMREQ
ƒ Master can be configured to operate as a slave simultaneously with master operation
ƒ Configurable fault behavior on loss of communication
ƒ Reports loss or reestablishment of communication with slaves in PLC fault table (configurable)
ƒ Support for 64 network device status bits (note: the bit for the master itself is always zero)
ƒ Firmware update via service port on module
User name | Member Level | Quantity | Specification | Purchase Date |
---|