K-WANG

+086-15305925923
Service expert in industrial control field!
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence 
Ship control system
Equipment control system
Power monitoring system
Current position:
   
Brand
ABB-CI546-Conveyor Control
❤ Add to collection

ABB-CI546-Conveyor Control

+86-15305925923
Mr.Wang
wang@kongjiangauto.com

The central control station has been fully equipped with ABB Advant OCS control  hardware.

16364.00
¥15345.00
Weight:4.200KG
Quantity:
(Inventory: 123)
Consultation
Product parameters
  • Telephone:+86-15305925923
  • contacts:Mr.Wang
  • Email:wang@kongjiangauto.com
Description

The central control station has been fully equipped with ABB Advant OCS control  hardware.


ABB-CI546-Conveyor Control

The central control station has been fully equipped with ABB Advant OCS control  hardware. A fast and secure transmission protocol couples to the AC450 Advant controllers in  the central station the many decentralised components of other manufacturers that  control the mining machines and conveyor lines. Serial interfaces such as MODBUS  could not be used because of the large amount of data to be transmitted. The  standardised Ethernet infrastructure proved to be the only applicable network  solution. The Transmission Control Protocol / Internet Protocol (TCP/IP) was chosen for  transmission. That protocol has been used so far mainly in LAN and WAN but is  getting applied more and more for transmission purposes as well.

The Central Control Station at Jaenschwalde, Germany ABB, Open-pit mining, Cottbus/Germany 4 2.1 Communication Infrastructure Four OTN (Open Transport Network) loops serve as data connections between the  central control station and the individual technological lines. Loop 1 pit Loop 2 overland connection of the F60 overburden bridge Loop 3 Cottbus North Loop 4 pre-cut Thanks to those redundant optical-fibre loops and the OTN nodes it is possible to  transmit the signals of the individual bus systems and video signals to the central  control station.

The Central Control Station at Jaenschwalde, Germany ABB, Open-pit mining, Cottbus/Germany 5 2.2 Communication Infrastructure of the Central Control Station As regards connections of control station components, it is necessary to distinguish  the equipment bus and the process network (PLAN) from the local area network  (LAN). The equipment bus is an MB300 master bus system which has been made  redundant with a view to higher availability. Participants are connected via two star  couplers (for redundancy), executed in 19-inch technology. Participants are the  active components of the “Advant” control system, such as operator stations,  information management stations and computers. The exchange of information between all subordinate units is made on Ethernet basis  via TCP/IP by twisted-pair cable (category 5). Those units, such as servers and client  PCs are divided into sub-networks according to tasks and security aspects. 3. Conveyor Control The CI546 multi-vendor interface of ABB supports TCP/IP and UDP and has  therefore been chosen for coupling the entire coal and pre-cut conveyor system with  the AC450. The drive stations of the coal conveyor line are equipped with A800 controllers, those  of the pre-cut conveyor line with remote-field controllers (RFC). The connection with  the A800 head-station control is made by a WIN 3.11 IPC integrated into the system  that on its part exchanges data with the PLC system via a dual-port RAM.

Zentralleitstand im Tagebau Jänschwalde ABB - Fördertechnik, Cottbus/Germany 7 The gateway PC behaves like a fully transparent protocol converter. The Ethernet  network is connected to the gateway CPC by the OTN communication network. The  distances to be bridged are up to 12 kilometres. For the pre-cut conveyor line 2000 integer words are passed on in the reception  protocol and 600 integer words in the transmission protocol. The total cycle time from  initiating the command in the operator station to the response is on average 800  milliseconds. Later in the year 2000 the A800 drive control systems will be replaced by RFC,  starting with drive station 36. The control concept of the coal conveyor system will  then be adapted step by step to the one of the pre-cut conveyor system.  The hardware configuration of the TCP/IP coupling is shown below:

5. Diagnostics Workplace A diagnostics workplace provided in the new central control station serves for  operative diagnostic checks by means of monitoring the behaviour of individual  electrical components. This is an important help for preventive maintenance.  The tools, specifically selected for each machine type, include · Advant Function Chart Builder Diagnosis of ABB Advant AC 450 · Network Control Center (NCC) Diagnosis of the OTN system · DIGSI Diagnosis of protective devices on  medium-voltage switchgear · PC-Worx Diagnosis of Interbus S · SIMOVIS Diagnosis of inverters · VIBRONET Vibration monitoring · ELCAD View Navigation in the equipment  documentation (single-line diagrams) The information supplied by the ABB control system in the form of · alarm lists · event logs · system lists · system status reports · status records is also used for diagnostic purposes. The diagnostics workplace is the integrating platform for all those tools and unites all  software modules and communication interfaces required for maintenance and  trouble-shooting. The workplace is open for remote access over the network. 5.1 Equipment The diagnostics workplace is equipped with a powerful industrial PC working on the  terminal-server edition of Windows NT 4.0 and a Citrix Metaframe. The monitor and  the keyboard are set up on one desk. An RS232 switch is used for making the necessary RS232 connections. Up to 32  such connections are possible. The selection of the RS232 connection required for a  specific diagnostic tools is made by the software. Print-outs can be made on the printer installed in the central control station. 5.2 Software A menu system is used to facilitate the start-up of individual programmes and help  orientation. The different applications can be chosen and started by an index.  Additional activities that may become necessary, such as software-based switching  of an RS232 channel, are performed automatically. The client software of the Metaframe system (ICA protocol) and the TCP/IP network  connection make the workplace accessible for remote control.


  • ABB 3BHT300009R1 DO620 Digital Output 32ch, 60VDC
  • ABB 3BHT300006R1 DO610 Digital Output 32ch 24VDC
  • ABB 0338434M-REF Refurbished DLM 02, Link module, as of V3
  • ABB DLM01 EXCITATION REDUNDANCY CONTROL SYSTEM
  • ALSTOM V4561484-0100 PCB circuit boards
  • ABB NE870 Network Router 3BSE080239R1
  • ABB DI610 – 32-Channel Digital Input Module for Industrial Automation
  • ABB DDO02 Industrial Digital Output Module
  • ABB 0369627MR DDO01 - DIGITAL OUTPUT
  • ABB DDI03 Module
  • ABB 0369626M-EXC Exchange of DDI 01, Digital input as of V 3
  • ABB Y0338701M DCP10 - CPU MODULE 8 MB
  • ABB DCP02 CPU MODULE
  • ABB 0369629M-REF Refurbished DAO 01, Analog output, as of V3
  • ABB DAI03 Digital Input Module
  • ABB D-20-0-1102 control module
  • ABB BB510 (DC5256) Digital Control Module
  • ABB BRC-300 Bridge Controller and Process Bus Adapter
  • ABB CI520V1 AF100 Communication Interface
  • ABB 3BHT300003R1 CI610 IOB_A Bus Extender for Basic Unit
  • ABB CI615 Controller Module
  • ABB EXC3BSE012868R1 CI626V1 AF100 Communication Interface
  • ABB CI627 Advanced Industrial Control Module
  • ABB 3BSE020520R1 CI810B AF 100 Fieldbus Comm. Interface
  • ABB CP450 Installation and Operation Manual
  • ABB CR-M4LS Logical socket for 2c/o or 4c/o CR-M relay
  • ABB 3HAC14550-2/09A Single servo drive unit
  • ABB 3HAC17326-1/02 Motor M26 Type B
  • ABB 3HNA001572-001 MCCB-02
  • ABB 3HNE 00313-1 TILLV.0317 Machine No. 64-25653
  • ABB 3HNE00313-1 (with 10 m cable and plug)
  • ABB 61615-0-1200000 Panel Controller
  • ABB AI610 – 32 Channel 12-bit Analog Input Module
  • ABB AI625 Analog Input 16ch, 12 Bit, 4-20 mA
  • ABB AI835A System 800xA hardware selector
  • ABB 3BHT300008R1 AO610 Analog Output 16ch, 12bit
  • ABB 3HAB8101-8/08Y Servo Drive Module
  • ABB 3HAC025466-001 Advanced Control Module for Industrial Automation
  • Rolls-Royce Marine AS 5880-PC1002 REV-A DEP. Steering - TENFJORD PCB Card
  • Rolls-Royce 5880-pc1002 Version A Dep Steering Gear-Tenfjord PCB Card 99046
  • Rolls-Royce Marine Lauer LCA 325. P2 PROFIBUS-DP Network Display Panel UN924
  • Rolls-Royce Marine UN924 Digital Display Controller
  • Rolls-Royce UN930 Digital Display Controller 24V
  • Rolls-Royce UN31 ECR Panel 000127603
  • Rolls-Royce Marine AS UN991.1 Distribution Plate
  • Rolls-Royce Propulsion Control Boards
  • Rolls-Royce SLIO 02 Canman controller network
  • Rolls-Royce Electronics 1071 Automatic Display Type No. 07918 B UN 921 ECR 24VDC
  • Rolls-Royce PCC1030C ULSTEIN Panel Controller Card
  • Rolls-Royce KAMEWA Propeller Control Room Panel Basic R160637A
  • Rolls-Royce Ulstein-UMAS V Marine Automation UN925 Panel Controller Roller for Parts
  • Rolls-Royce Marine AS UN921 Operator Panel
  • Rolls-Royce Marine r10I53s / R10I53S Panel Computer 98H0101A0000I Version 1.9
  • ABB 3BHB003689 Multifunction Controller Module
  • ABB 3ASC25H204 DAPU100 high-performance processor module
  • ABB 3ASC25H203 Module
  • ABB 35AE92 – High Performance Industrial Control Module
  • ABB 200900-004 I/O Adaptor PLC Board
  • AB 1794-IE8 FLEX I/O Analog Modules
  • AB 1794-IF8IH FLEX I/O Isolated Input HART Analog Module
  • AB 1794-IE8H FLEX I/O 8 Input HART Analog Module
  • AB 1794-L34 FlexLogix Controller System User Manual
  • AB 1794-OB8 FLEX I/O Digital DC Output Modules
  • AB Enhanced PLC-5 Programmable Controllers
  • AB 1785-BCM and 1785-BEM Modules for PLC-5 Programmable Controllers
  • AB Cat. No. 1785-CHBM ControlNet PLC-5 Hot Backup System
  • AB 1785-ENET PLC-5 Ethernet Interface Module
  • AB 1785-L20C15 ControlNet PLC-5 Programmable Controllers
  • AB 1785-L40E Ethernet PLC-5 Programmable Controllers
  • AB 1785-PFB PLC-5 PROFIBUS Local Station Manager
  • AB 1785 PLC-5 Programmable Controller System
  • AB 1785 um019 PLC-5 Ethernet Interface Module
  • AB 1786 - RPA/B ControlNet Modular Repeater Adapter
  • AB PLC-5 1771 to ControlLogix 1756 I/O Wiring Conversion Systems
  • AB Analog Input Module Cat. No. 1771-IFE
  • AB 1771-IFE A/B/C Analog Input Module
  • AB Cat. No.1771-IVN DC (10-30V) Input Module
  • AB 1771-OFE Series B Analogue Output Modules
  • AB Cat. No.1771-QB Linear Positioning Module
  • AB 1771-VHSC Very High-speed Counter Module
  • AB 1771 Digital I/O AC Input and Output Modules
  • AB 1783 Series Ethernet Taps
  • AB Stratix 8000 and 8300 Ethernet Managed Switches
  • AB MicroLogix 1400 Programmable Controllers
  • AB1642 Module Manual MicroLogix 1500 & CompactLogix Resolver Interface Module
  • AB 1769-L24ER-QB1B CompactLogix 5370 L2 Controllers
  • AB 1769 Compact I/O Modules Specifications
  • AB 1769 Controller CompactLogix System
  • AB 1763-L16AWA MicroLogix 1100 Programmable Controller
  • AB 1763-L16AWA MicroLogix 1100 Programmable Controllers
  • AB 1762-L24AWA MicroLogix 1200 Programmable Controllers
  • AB 1762-IQ8OW6 DC-Input/Relay-Output Combination Module
  • AB 1757-SRM ProcessLogix and ControlLogix System Redundancy Module
  • GE ALSTOM:SPU.232.2.029.366.817
  • AB ProcessLogix R500.1 Process Control System
  • AB 1761 - NET - Ethernet Interface for ENI MicroLogix
  • AB 1761-L20BWB-5A MicroLogix 1000 Series
  • AB 1761 MicroLogix 1000 Programmable Controller
  • AB 1756-DHRIO, 1756-DHRIOXT ControlLogix Data Highway Plus-Remote I/O Communication Interface Module
  • AB 1756-D IO ControlLogix I/O Modules Specifications
  • AB 1756-cpu ControlLogix Systems
  • AB 1756 ControlLogix Analog I/O Modules
  • AB 1756 ControlLogix System
  • AB 1756 IB32 ControlLogix 32-point DC (10…31.2V) Input Module Series B
  • AB 1756-IR6I ControlLogix Analog I/O Modules
  • AB 1756-DNB ControlLogix DeviceNet Scanner Module
  • AB 1756-CN2RXT ControlLogix-XT ControlNet Interface Module
  • AB 1756-CN2 1756-CN2R ControlLogix ControlNet Interface Module
  • AB 1747 - AENTR SLC 500 EtherNet/IP Adapter
  • AB 1746, 1747SLC500 Control System Selection Guide
  • AB 1746-C7, 1746-C9, 1746-C16 SLC 500™ Programmable Controller Rack Interconnect Cables
  • AB 1746-BTM Drum Temperature Control Module
  • AB 1746-BAS and 1746-BAS-T SLC 500 BASIC and BASIC-T Modules
  • AB 1746-A4, -A7, -A10 SLC 500™ Modular Chassis
  • AB SLC 500™ Modular Chassis 1746-A4, -A7, -A10 and -A13 Series B
  • AB 1734-AENT POINT I/O EtherNet/IP Adapter
  • AB Allen-Bradley's 1734 POINT I/O Series Products
  • A-B 1715 Redundant I/O System Specifications
  • AB 56AMXN/B ControlLogix AutoMax DCSNet and AutoMax Remote I/O Communication Interface Module
  • AB Bulletin 1203 Serial Communications Module
  • AB 1326AB High Performance AC Servomotors
  • AB 1326AB 460V, Torque Plus Series, AC Servo Motors
  • AB 1336 PLUS II Engineering Drives
  • AB CENTERLINE® 2100/2400 Series Motor Control Centres
  • AB 1394 Digital AC Multi-Axis Motion Control System
  • AB 1398 ULTRA 100 Series Drives
  • AB 1402 Series Line Synchronisation Modules
  • AB 1407-CGCM Combined Generator Control Module